Top 20 Panasonic DMC-FX37 Digital Camera Questions & Answers

Hi Im after Panasonic EW6021 Manuals can you help Please.

You don't need a driver or any special software. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo management program such as Picasa ( http://picasa.google.com).

You may download a copy of the manual at http://www.fixya.com/support/p954691-panasonic_dmc_fx37_digital_camera/usermanual-AD39340-PDF

You may download a copy of the manual at http://www.fixya.com/support/p954691-panasonic_dmc_fx37_digital_camera/usermanual-AD39340-PDF

I don't know about purchasing one, but you can download a copy for free at http://www.fixya.com/support/p954691-panasonic_dmc_fx37_digital_camera/usermanual-AD39340-PDF

Panasonic currently does not have new firmware for the DMC-FX37. See http://shop.panasonic.com/shop/model/DMC-FX37A?support

According to the manual, you should press "menu/set" then "playback"menu, then select "copy".

Turn the camera on. Slide the REC/PLAYBACK selector to record (the camera icon). Press the MENU/SET button. Press cursor-left, use cursor-up/down to select the wrench icon, and press cursor-right. Use cursor-up/down to select the talking head icon and press cursor-right. Choose the desired language and press MENU/SET.

Hi,

Checkout this tip about digital camera error messages


Lens Errorfix for Digital Camera

heatman101';'';'
;'

Slide the [REC]/[PLAYBACK] selector to the recording mode (camera icon). Set the mode dial to the camera icon. Press [MENU/SET] to display the menu. Press cursor-left, use cursor-up/down to select the wrench icon, then press cursor-right. Select the head-with-speech-bubble icon.

Turn the camera on. Slide the REC/PLAYBACK selector to record (the camera icon). Turn the mode dial to the camera icon. Press MENU/SET to display the menu. Press cursor-left, then cursor-down to select Setup (the wrench icon) and then press cursor-right. Select the nineteenth item on this menu (should be the second-from-last).

The systems control board has detected a problem with the auto focus lens, the focus is controlled by a tiny motor that has jammed or there is a mechanical issue with the camera lens. It will require a technician that is highly skilled to deal with the situation, but the repair cost would probably not be justified.

Take a micro-fiber cleaning cloth (the ones you use to clean your sunglasses) and clean the lense.

Hello

The problem is that the lens has become stuck in the barrel after dropping it. There are some DIY solutions you could try, but the probability is that you will have to get it fixed by a professional.

Use these at own risk as it may further damage the camera.

Firstly , try connecting your ac adapter or usb cable.

Try holding the shutter button while switching on the camera.

Look at the lens , and if some of the lens 'circles' is misaligned or not concentric then try wiggling it (while holding camera lens down).

Try gently pushing or pulling the lens when it extends but this is risky as it may cause the lens barrel to slip out of its guidance system.

Another way to do this is to place the camera lens down on a hard surface and then power it up. Be sure to use a soft cloth or something similar as to not scratch your lens or casing. Let the lens push the camera up and down a few times and sometimes the little resistance provided by the camera is enough to get things going again.

Try hitting your camera near the lens on the body with the soft tissue on the palm of your hand.

Other than that , I would take the camera to a repair center for a evaluation to see if it would cost more to repair than to replace the camera.

If it is still under warranty I would suggest you take it in before trying any of these steps and remove any off-brand batteries or accessories as some stores are really fussy about warranty repairs on camera's with non-brand accessories.

Hope the advise is useful.

Regards
Andrea

Hi,

This is a common problem on this set. This is either due to faulty CCD sensor or faulty LCD screen. Look at the previous recorded images or videos. If you see the same white lines in previous saved images or video's , it would be suggestive of LCD screen unless it is a faulty CCD sensor.

If that is LCD panel, it is not worth repair.If that is CCD sensor, then you could call up Panasonic to check whether CCD sensor of your model is under recall or not.

Read an old article :-

http://www.imaging-resource.com/badccds.html

If it is not under recall, try to get some good replacement or repair at low cost unless invest in new camera.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!

Slide the [REC]/[PLAYBACK] switch to the REC position (camera icon). Set the mode dial to AUTO (green camera). Press MENU/SET to display the menu. Select LANGUAGE (head with speech bubble). Pick your language from there.

Language should be the second-to-last item on the Setup menu.

You may use this english version of Panasonic DMC-FX37 Manual.
Using this manual and counting the menus and sub menus you can find the language. And change it to English.
In this manual especially read the belows.




If you find this explanation helpful please vote.. good luck.