20 Most Recent Proscan 26LB30QD 26 in. LCD HDTV - Page 2 Questions & Answers

Comcast's remote has nothing to do with closed captioning. It's on your tv remote. First, the tv has to be capable of handling closed captioning, and your's is- and second, the program must have closed captioning provided- current programs do, some older shows do not support closed captioning. Recheck your remote, and if necessary- look at the setup instructions that came with the TV- they should also be posted online at the Proscan support site.

Check and replace the damaged component/s at its main board. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/

check ac supply and fuses .

Testing remote control: The remote control puts out IR (InfraRed) signal that human eyes cannot see, to find out if the remote is sending out the signal or not you just point the remote at the digital camera's Lens (Digital Camera can detect IR), you should see flashing light on the camera's screen when any one of the remote button is pushed. If you do see the flashing on the camera, then the problem is in the TV IR receiver or the main logic board; more troubleshooting with scope will be needed to look at the signals. Parts: www.shopjimmy.comwww.remotes.com

Can I replace the Intel Celeron 420 processor on my EMCP73VT-PM motherboard with a duo core E8600 or is there a better inexpensive replacement?

Here is the list of universal remote codes given by PROSCAN in your owners manual. I hope this helps you with your problem. UNIVERSAL REMOTE CONTROL CODE LIST
For Universal Remote Control brands listed below, please use accompanying Proscan codes
and refer to your Universal Remote Control User Manual for basic instruction for changing TV code to
operate Proscan model.
Proscan codes for Sony TV=8003,8012
Proscan codes for Philips TV=1005,1006,1007,1035,1064,1216
Proscan codes for other universal remotes=272,132,134,116,040,016,024,056,019,262

What isit connected to? That is where the signal comes from.

hi make sure the timer is not on , the other fault could be capacitor or a dry joint in the power supply ,i'd look for a tech in your area hope it helps regards shaun

Short circuited component/s at its main board. Contact any service technician. If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. Surf the site with patience. http://electronicshelponline.blogspot.com/ Pull up older posts there.

chec your wires in the back u have the yellow wire in wrong plug in

Replace the power cord. It can be bought separately. Contact the authorized dealer. Gopakumar Gopalan Google

The eject button is supposed to be on the side or on the back of the set.

If you wish to know its programming procedure, check the sites linked here. it is difficult to type all all here by this wondow. http://electrohelponline.blogspot.com/ http://electro-medical.blogspot.com/ Both the sites have setup code list, and setup procedure to many popular brand remote controls. Check the site in 'Mosaic' view. It will make search easy.

Direct TV Remote Codes for various devices.

The setup code to check are 1000,1008,1108,1068. To get more details about its setup procedure http://electrohelponline.blogspot.com/ Check this link.