20 Most Recent Lexmark X3650 Printer - Page 7 Questions & Answers

Make sure the scan software is already installed in your computer. If not, install it using the installation cd that came with your printer. If scan software is already installed and was working before, you can uninstall and reinstall the software. Check your firewall. Make sure to allow all Lexmark communications to go through. Hope this helps. Good luck!

Most likely you have something on the roller or jamming it. I have disassembled printers to find paper, paper clips, and other things helping to jam the paper roller. Try to clear the obstruction by checking around the roller anyway you can. As I said, sometimes you have to take the printer apart to get to the problem. Sometimes it's a bad gear, so it can get a bit tricky. It's your call- you might try to unjam it, and if that fails, replace it- they're pretty reasonable these days, anyway. Good luck!

Hello :

Try this : Uninstall the printer software and reboot system , then install it again and reboot system once again . That should solve the problem . If problem not solved by this solution , then scan system for virus infection . If system was clean of viruses , then check registry for errors .

good luck .

rate if useful please !

Could be many things... First Is it a new cartridge? Did you refill it? If you did was it dry when you did? always fill before completely empty. First try the clean setting on your printer. Also try the prime ink if it has one. You can hold the cartridge under hot water for a few min to losen hard ink. Just the bottom of cartridge. blot dry with a paper towel. ink should show on towel. dont touch the brass part of cartridge..

Plug in your printer, turn it on, then lift cover from front, not just scanner cover, reach lower. Carriage will move back and forth a few times before settling in middle of printer. Pull forward on both levers to release covers over print cartridges. Lift up on cartridge on end closest to you and then pull toward you and up to remove cartridges.Remove tape from new cartridges and install as per instructions on box new cartridges came in or just reverse removal instructions.

You must install the scanner software that came on your installation disc. If you do not have it you can download it from Lexmark itself. Without the software installed the computer has no idea that your printer has scanning capability.Once you are done you should be pleased, I have always gotten good scans from my Lexmark products.

Black is number 36, color is number 37.

Hi You can download a driver Software from my website then you can use the driver to set your printer up.
Just click on this link and it will download for you, and it is best to save it on your desktop so you can find it.
This is for the lexmark x3600-to-x3690Win7

Link= 32Bit= http://www.4all2sell.com/driver/Lexmark-x3600-to-x3690Win7en32.exe
Link=64Bit = http://www.4all2sell.com/driver/Lexmark-x3600-to-x3690wWin7-en64.exe
Please let know if it works for you thanks

Ones you have downloaded just double click and it will take you through the installing

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one and to go on helping.
All The Best: Pineworks

Go to all in one program
at the top left click on Maintain\Troubleshoot
Right window click on Device Status And Ink Levels
that will open a new window
Click on The button that looks like 4 different colored ink drops
Click on Install a new print cartridge
Click on Next
Now you should be in Select The cartridge installed
Open lower drop down window and click on No its new
Follow the prompts from there or click OK
This should fix the problem.

On your printer press the spanner button, then under "Device Setup" go to Languages, scan through untill you see English, pres ok then it should be sorted

If this is a refilled cartridge, most likely the electronics have been turned off on the cartridge. I own a cartridge refilling store and I don't refill the Lexmark 36 or 37 because the printers turn off the electronics on these cartridges when they get empty so they can't be refilled. If this is an original Lexmark cartridge, I think that Lexmark is making their printers so extremely sensitive to refills that they even kick out some original manufacturer cartridges. I have had a couple customers that this has happened to and it seems to happen more frequently with prebate cartridges. I recommend exchanging your cartridge for a new one (Lexmark brand).

Go to Lexmark support serch for your printer and then go to downloads to download the install files http://support.lexmark.com/index?page=home&locale=EN&userlocale=EN_US

Its looking to associate an application to itself that it can send the images to. Most all in one printers provide software for this purpose. You have to install the software that came with your unit

Hi there,

Well it's better if you tell me which operating system you are using....?
anyway please follow the below steps to communicate your printer to the desktop  -

1. Check if your printer is network ready. Many newer models are designed to work on networks. Examine the documentation to see if your printer supports Wi-Fi (802.11x) or Bluetooth. 
 
2. Add network support to your printer. If your printer is not already wireless you can connect it to a wireless router using the RJ-45 Jack (it resembles a large telephone jack). You can also buy an expansion card that will add a jack or buy an external print server that will connect to the USB or parallel port.
 
3. Connect your printer to the network. If your printer is not wired, you’ll have to connect it directly to your wireless router. Connect a networking cable from the RJ-45 Jack on the printer (or adapter) to the router. Plug it into any jack except the UPLINK. The printer should automatically connect to the network when turned on.
 
4. Install printer drivers on all computers. Using the disc that came with the printer or drivers downloaded from the manufacturer, install the printer’s drivers onto each computer on the network.
 
5. Print. You should be able to access the printer just like any other wireless device. Select the printer from the Print menu when you print.

Share Your Printer in Windows
 
1. Install the printer. Set up the printer as normal on a machine that is already connected to the wireless network. Connect all necessary cables and install all necessary drivers.
 
2. Open the printers and faxes folder. Click "Start," then "Control Panel," then "Printers and Other Hardware" and then "Printers and Faxes."
 
3. Share your printer. Find the icon for the printer you just installed. Click the icon once and then select SHARE THIS PRINTER in the tasks pane on the left. Now, right click the icon, select properties and go to the SHARING tab. Click "Share Name," and then click "Okay."
 
4. Connect to the printer. On the other computers within the network, open the control panel and click "Printers and Other Hardware." Select "Add a Printer."
 
5. Select "Printer Connection." When prompted, select this option instead of the local printer. Find and select the printer you just installed and select it. 
 
6. Print as normal. Next time you print a page, send it to your networked printer.

Good Luck!!

Thanks

You're best bet is to go to lexmark.com so you can get the proper drivers and programs to run the printer properly. If they don't have them on line they should be able to send you a disc to install the printer.

Check where the paper comes out and also remove the paper tray and check underneath the printer as paper can be stuck there aswell. Ensure that you remove the whole piece of paper.

Refilled cartridges MAY OR MAY not work. Try a new cartridge.

try to download windows vistax64 printer driver from their website instead of windows vista only