Top 20 Epson Stylus NX400 InkJet Printer Questions & Answers

I thing you need to call customer support try 0-800-090-3966 for more info thanks

check printer settings or document settings back ground color settings you can print a page color to any of the color bar settings so there is a setting that has been change to grey that is causing the problem

Sometimes just pressing on the cartridge on the side of the memory chip, till the cartridge says click. also make sure there is nothing is in the cartridge holder like dust or a scrap of paper so a chip can't make contact.

1) Remove all ink cartridges, unplug, plug back in, put all ink cartridges back in--should now work 2) if not, download drivers from epson.con, and install & then do 1 above again

Um, the blue ink cartridge is not assembled correctly.

do you have the correct ink cartridges,also make sure they are installed correctly if this all checks out then try to unplug printer for 30 seconds and then plug back in and let it restart

There are different ways to reset an Epson ink cartridge depending on the model of your printer and the type of cartridge you are using. Here are some general steps that may work:

1. Turn on your Epson printer and wait for it to stop making any noise.
2. Open the printer cover and remove the ink cartridges.
3. Locate the small microchip on the side of the cartridge. This is the chip that stores the ink level information.
4. Use a cotton swab or soft cloth to clean the metal contacts on the chip. Make sure there is no ink or dirt on them.
5. Reinsert the cartridges into the printer and close the printer cover.
6. Turn on your printer and let it recognize the cartridges. This process may take a few minutes.
7. Check your printer status or ink level indicator to confirm that the cartridges have been reset.

Note that some Epson printers may not allow you to reset the ink cartridges, or the reset method may vary depending on the specific model or type of cartridge. If you're unsure about the process or have trouble resetting the cartridges, you can refer to the printer manual or contact Epson support for assistance

You may download the Epson drivers from http://www.epson.com/cgi-bin/Store/support/supDetail.jsp?BV_UseBVCookie=yes&oid=106004&prodoid=63075469&infoType=Downloads&detected=yes&platform=OSF_W_VISTA-32

If you push STOP/CANCEL button for 3s. caret should go to service point, there you can change cartridges.

A5 is the size of 148x210mm based on ISO 215 norm for paper Format A series[3] B series[4] C series[5] Size mm × mm in × in mm × mm in × in mm × mm in × in 0 841 × 1189 33.1 × 46.8 1000 × 1414 39.4 × 55.7 917 × 1297 36.1 × 51.1 1 594 × 841 23.4 × 33.1 707 × 1000 27.8 × 39.4 648 × 917 25.5 × 36.1 2 420 × 594 16.5 × 23.4 500 × 707 19.7 × 27.8 458 × 648 18.0 × 25.5 3 297 × 420 11.7 × 16.5 353 × 500 13.9 × 19.7 324 × 458 12.8 × 18.0 4 210 × 297 8.27 × 11.7 250 × 353 9.84 × 13.9 229 × 324 9.02 × 12.8 5 148 × 210 5.83 × 8.27 176 × 250 6.93 × 9.84 162 × 229 6.38 × 9.02 Paper size Wikipedia the free encyclopedia

Is it a wireless printer,Bluetooth or cabled.?

Since 2005 Epson and all other inkjet manufacturers use a little of the colors to print black. so ,no,you will not be able to print just clack. Even color laser printers use the colors to print black.The exceptions since 2009 have been the Canon color lasers and the HP color lasers units they provide print engine for.

No it does not. It has PictBridge for cameras and phones that have a usb port.

Epson L210 does not support Borderless Printing. The minimum margin seems to be .1". You can see this in the Print Preview, just check the Printable Area choice on the View Tab. If you would like to use small margins around your document, use the "Printing Presets" on Epson L210, like "Document - Standard Quality". The "Document Size" will be A4. Leave this setting alone. You can still use 8-1/2 x 11 paper. Just make sure that what you're about to print will fit in the 8-1/2 x 11. My document margins were followed then. I've not tried it for 8-1/2 x 13 paper yet.

most Epson printers have to charge the cartridge after refilling. in order to do this you must go through two or three cycles of head cleaning followed by nozzle checks. If you do this through software it will progressively get stronger and stronger until after the third cleaning cycle the cartridge should be working. do not use the buttons on the printer to

turn off the printer power supply, in some printer wen power is off the cardridge head becomes free and it can be moved.

sounds like a partially clogged print head. run anozzlecheck to see if the pattern is correct, then the built-in cleaning followed by another nozzle check. if it hasnt gotten better, you should get this $7 kit. I have had success with it on a number of printers Hope It's resolve all Your Printer Problem, Or Still having Problem Then follow Us For Epson Printer Support

You will have to be careful and precise. Using a needle or other suction product. Extract some ammonia int it. Let the printer move the head to center. Unplug unit. Take syringe and place a few drops into where the cartridge hole would have lined up Be carefull not to OVERFILL head. Install cartridges and let printer sit for an hour or so. . Power back on and let the machine do a self clean.Should be good to go.

Change Ink Cartridge in Epson Printer isn't a difficult. Just follow the simple steps to change ink cartridge in Epson Printer: ·Turn on Epson printer·Open its cover or scanner then left the unit of the scanner and wait for it. ·Ensure that the print head is at replacement position. If not the press "Maintenance" button. Follow the more steps to change ink cartridge in Epson Printer.

Leaking cartridges or Bad printer heads. New printer is cheaper than fixing.