20 Most Recent
Daewoo DW500M Top Load Washer - Page 5 Questions & Answers
Daewoo washing machine dw7020p won't spin
If the belt mechanism is either loose or slipped or that the belt is damaged or worn out it might not be able to spin with enough or spin at all then . If the belt is broken or fully off the rollers then it can't spin at all. A washer that won't spin is not washing. If it can not agitate clothes and then clothes don't get clean. Call a repair person to have a look at your washing machine to see what the issue is.
E9 E2 ERROR
Message = E2
Error = OVERFLOW ERROR
Cause & Solution =
The water is supplied continuously due to an defective inlet valve. Change the valve inlet.
The valve inlet is normal, but the water level sensor Change the water level sensor
(sensor pressure) is low. (sensor pressure).
The drain motor does not work - Test and if faulty change the drain pumpMessage = E9
Error = SENSOR PRESSURE ERROR
Cause & Solution = The water level sensor is faulty. Change the water level sensor.
(remove pressure tube and blow through it to make sure it is clear first)
My Daewoo DWF 806 MP doesnt dry/spin after washing
my Daedwoo DWF-806 MP machine when i swith on shows figure 49 and not figure 0, and it also making noise like Buzz in between when the machine is ON. Can anybody help me to resolve this defect
thanks
Error code E8
Most likely a control or motor issue. Probably should call service.
Not finding what you are looking for?