Top 20 Lisle Serpentine Belt Tool Questions & Answers


Go to the dealer Or MAybe Look Under the Hood For Diagram it will be ther

Lisle Serpentine... | 631 views | 0 helpful votes


05cc9d69-6cc3-4d41-8471-2e623f693f7e.jpgI'm not sure if this is it or not

Lisle Serpentine... | 601 views | 0 helpful votes


remove the old belt. install teh new on in the reverse of how the original was removed.

Lisle Serpentine... | 86 views | 0 helpful votes


turn the engine off and the serpentine belt will stall

Lisle Serpentine... | 58 views | 0 helpful votes


The diagram is usually on the bottom side of the hood or in fron of the radiator. look at all of the stickers under there.

Lisle Serpentine... | 150 views | 0 helpful votes


usually it is on the chasis close to the battery.

Lisle Serpentine... | 73 views | 0 helpful votes


If you dont see diagram go to the link and you will see it
Hope this helps
http://media.photobucket.com/image/05%20taurus%20serpentine%20belt%20diagram/jwko/01TaurusBeltDiagram.jpg
01taurusbeltdiagram.jpg

Lisle Serpentine... | 1,517 views | 1 helpful votes


It will depend on what engine
Here is a cool pdf of many belt diagrams:
http://onlinemechanical.net/support-files/serpentine_belts.pdf
page 4 of this PDF begins listings of different cars. Find yours and then click on belt number and it will take you to the page for the diagram.

Lisle Serpentine... | 248 views | 0 helpful votes


You will need a 19 mm wrench to fit the nut on the bracket that the idler (tensioner) pulley is attached to. Pull the wrench clockwise to release tension just enough to change the belt then slowly let tension on the belt.The 19 mm nut is just above the bolt that holds the idler pulley bracket on to the motor .

Lisle Serpentine... | 14,374 views | 3 helpful votes


Here is a cool pdf of many belt diagrams:
http://onlinemechanical.net/support-files/serpentine_belts.pdf
page 4 of this PDF begins listings of different cars. Find yours and then click on belt number and it will take you to the page for the diagram.

Lisle Serpentine... | 80 views | 0 helpful votes


Click on the following Link. It has the Serpentine Belt Diagrams you will need.
Regarding "How". The Tensioner Pulley ARM is "loaded" with a spring. The standard rule: Rotate/Move the Tensioner away from the belt contact area and towards the open area/non belt contact area. In Diagrams the Tensioner is Identified as #7 and in the next as #6. These should be rotated counterclockwise and down and to the left away from the belt. While doing this, the belt will loosen and should removed from one of the more easily "other" Pulleys.
This Link also has many other useful Diagrams for your use.
http://www.2carpros.com/car_repair_information/year/2002/make/volkswagen/model/passat/2002_volkswagen_passat_drive_belt_routing_diagram.htm

Lisle Serpentine... | 3,297 views | 3 helpful votes


This was Posted under the Serpentine Belt Tool Category and not the Cars & Truck Category, delaying response. My apologies...
I do not know if you still need this information.
I also do not know what Year your BMW 528i is, as the 5-series were manufactured from 1997 thru 2004.
Click on the following Link. Regardless of your Year it should have the Diagram's and Photo's you need to Remove and Replace your Serpentine Belt, including the procedure in loosening the Tensioner.

http://www.2carpros.com/car_repair_information/year/1997/make/bmw/model/528i/1997_bmw_528i_drive_belt_routing_diagram.htm

Lisle Serpentine... | 3,411 views | 2 helpful votes


Click on the following direct Link. It has several Diagrams for your Belts, based on your specific engine and options. These also include specific instructions on moving the Tensioner, in order for you to loosen and remove the Belt.
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.Com!

Lisle Serpentine... | 708 views | 3 helpful votes


go to Autozone.com. See if you can access "ZNET" there. you can look for the belt/routing diagragm there.

Lisle Serpentine... | 428 views | 1 helpful votes


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

I do not know if you have the Explorer, Explorer Sport, or Explorer Sport Trac, However I have included all available Links for you to choose from.

CLICK
on the following LINKS It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!

http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/explorer/2002_ford_explorer_drive_belt_routing_diagram.htm


http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/explorer_sport/2002_ford_explorer_sport_drive_belt_routing_diagram.htm


http://www.2carpros.com/car_repair_information/year/2002/make/ford/model/explorer_sport_trac/2002_ford_explorer_sport_trac_drive_belt_routing_diagram.htm

Lisle Serpentine... | 1,513 views | 0 helpful votes


Very simply, there should be a spring-loaded "idler pulley" that keep tension in the belt, locate that and figure out how to release tension, they are all slightly different. Important!!- Make sure you make a diagram of how the belt is on there, so the new one can be threaded properly.
The idler puller usually is one that is just there, not driving an AC pump or alternator, power steering pump, etc. Look for a square hole in the idler pulley itself or it's bracket that a socket wrench driver can fit into. Then slightly put pressure on the socket wrench handle and the pulley should move without too much effort.

Lisle Serpentine... | 58 views | 0 helpful votes


The tool is just a long wrench really. You turn the tensioner counter clockwise to release the tension. Take care to just turn enough to release enough tension to remove the belt. If you turn too far you will release the tensioner and the spring inside it.

Put the new belt in place running over the tensioner last. Then again release the tension with the tool in the same manner.

You do not need the special tool any wrench will do that can reach the tensioner.


Lisle Serpentine... | 195 views | 0 helpful votes


unfortunatley yes you will, i would advise taking a picture or doing a drawing of the routing of the belt, as to be honest it goes everywhere..lol, good luck

Lisle Serpentine... | 165 views | 0 helpful votes


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
Thanks!
http://www.2carpros.com/car_repair_information/year/1993/make/chrysler/model/new_yorker/1993_chrysler_new_yorker_drive_belt_routing_diagram.htm

Lisle Serpentine... | 198 views | 0 helpful votes


My sincere apologies for the delayed response.
I am personally going back to answer your unanswered questions.

I do not know if you still need this information, but I am going ahead and answering it anyway. You may want to Print the Diagrams for future use.

CLICK
on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my apologies...
http://www.2carpros.com/car_repair_information/year/1998/make/buick/model/park_avenue/1998_buick_park_avenue_drive_belt_routing_diagram.htm

Lisle Serpentine... | 144 views | 1 helpful votes

Not finding what you are looking for?
Lisle Serpentine Belt Tool Logo

90 questions posted

Ask a Question

Usually answered in minutes!

Top Lisle Hammering Experts

Robert Wooley
Robert Wooley

Level 2 Expert

177 Answers

john h

Level 3 Expert

22486 Answers

Lawrence Oravetz

Level 3 Expert

10543 Answers

Are you a Lisle Hammering Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Lisle Hammering

  • Lisle Hammering

Most Popular Question

serpetine belt install 2001 mustang

  • Hammering
Loading...