Bell Cocoon Child Carrier - Page 2 - Answered Questions & Fixed issues
I have a byron door bell. If i buy anmother one
This all depends on the design of the unit, if its a fixed frequency then you would need to ensure that the second unit matches the frequency, however if the design allows you to "select"the frequency, usually by a small group of switches then there should be no reason why it wouldnt work, your best chance is to look at your exsisting setup and see if its got any way of setting the frequency, or if it doesnt buy a different unit that is capable or learning a frequency, i apologise for not being able to give a more direct answer on this but i hope it helps!
11/19/2009 1:51:20 AM •
Bell Cocoon...
•
Answered
on Nov 19, 2009
•
1,600 views
All circuits are busy
Since this is not time stamped im assumeing the problem has been fixed. If not mail me gouigoui @ gmail.com (remore the spaces) and ill look into it for you
10/4/2009 5:01:20 PM •
Bell Cocoon...
•
Answered
on Oct 04, 2009
•
82 views
My door bell stopped working, what could be the
Most likely the transformer which can be found by your fuse pannel, replacement of that is cheap and easy. If you replace that and it still dosent work, you might have to replace the bell. One way to test if it is the bell is disconnect it from the wall and attach a battery using some scrap wire to it, and see if it works. If it does then its the transformer, if not then its the bell.
10/3/2009 11:45:55 PM •
Bell Cocoon...
•
Answered
on Oct 03, 2009
•
1,064 views
No dial tone from the residence and when calling
Those are probably two different problems.... no dial tone could mean service hasn't been connected yet or has been disconnected. or if you using a wireless phone it could be an issue with the phone
Calling a number you think is the right number and getting the wrong number is mostly because you are dialing the wrong number. You should be able to call your local phone company and get this resolved pretty quickly since they will have all of the answers you need.
Is my phone on and what is my phone number
9/12/2009 4:16:56 PM •
Bell Cocoon...
•
Answered
on Sep 12, 2009
•
83 views
Bell f20 resetting trip odomoter DST
Did an obsessive search of this problem and found this: "Right Button" . . . click to display the "DST" (distance) than hold the "LEFT Button" for 2 seconds. YEAH!! Reset trip ONLY!! This problem is simply an error in the instruction manual. ~G~
2/10/2012 11:37:43 PM •
Bell Sport &...
•
Answered
on Feb 10, 2012
•
1,432 views
I have a Craftsman 9hp 29inch blade snowblower
Hi timmmarquez, I have the same snowblower. That plug is for a light if you want to install one. Can you smell gas when you try to start it ? If you have spark you can iliminate the kill switch. Make sure you have a clean spark plug to (not a weak spark). Good Luck.
12/28/2010 3:46:18 AM •
Bell Sport &...
•
Answered
on Dec 28, 2010
•
402 views
Bell f20 computer - no code for 25'' wheels?
when i first got mine it prompted me to enter the circumference of my tire in millimeters (mine was 2074mm). you can get back to this by holding the bottom button in the center (this button is really two buttons one on the left side the other on the right side; holding the center pushes both these buttons). when it rests you'll see the 4 digit numbers. i think u use the right button to change the number and the left to move to the next. remember the number represents your tires circumference in millimeters. for a quick approx use this calculation (Tire Diameter)X(3.14)X(25.4). So for me it was (26in)X(3.14)X(25.4) = 2074mm
6/22/2009 6:49:39 AM •
Bell Sport &...
•
Answered
on Jun 22, 2009
•
285 views
Hi we need a manual
Hi Linda, i have the same 1983 Travelaire motorhome Econoline F-350 26ft and are in search of the Shop/owners manual ... Do you know where to find one ?
I am located in BC Canada
Reg 250-379-2971
[email protected] if you can contact me ?
How to repair tent trailer roof
Go to an auto parts store and buy a fiberglass kit. Resin, hardener and cloth. Clean and rough the area. apply a coating of mixed resin, then a layer of cloth. Let it dry and repeat a couple of times. After you are satisfied with that get a gallon of Elastomeric, you will find it at Lowes/Home depot. Clean the entire top and apply 2 coats with a brush or roller about 24 hours apart. No rain or moisture for a couple of days. Project complete, water proof roof.
I'm in my 50's, can I start playing table tennis?
Definitely! You should know that Table tennis is asport for all ages, and it is never too late to get started. You should know that in the year 2008, Olympic table tennis canbe called the Veteran Year as 38 year old
Gao Jun and34 year old
**** Chendirectly qualified for the 2008 Beijing Olympic Games on the women's side. Andon the men's side, 45 year old
David Zhuangwon the right to attend the Olympic Games as the USA' sole male representative.
Not finding what you are looking for?