Bowflex Revolution Home Gym - Answered Questions & Fixed issues

You should be able to take off the plates by turning them the opposite direction as putting them on. If you look at the plate you'll see the grooves that lock each one together. You just need to twist the plate you want off and twist it out of the grooves. Once out of the grooves it will turn back to normal, releasing the tension on the bands inside. You can then just slide it off the bar. The perm attached 5# plate tends to turn too. You need that one to be stationary. If you can't do it alone, have someone hold the perm 5# plate steady as you turn 'off' the additional plates.

I had same problem. I fixed it by taking plastic sides off using a long phillips head screwdriver. Jay, you don't have to take the sides off to fix your problem. The sides come off only to untangle and rewind cables on pulleys. Pull the cables all the way out. Have a helper pull out and keep holding out the tension knob This is shown at the bottom of page nine in the manual. With someone holding the tension knob out turn the large pully located beneith the tension knob CLOCKWISE! I screwed mine up by turning it counter-clockwise. This winds the handle to the top and if you start with all the cable pulled off the pully, the cable should then wind itself nicely back onto the pully. Once the handle is all the way up, with the round ball on the cable jammed up against the pully, then and only then let go of the tension knob and let it fall back into place. If the handle falls down a few inches repeat this proceedure but push lower pully a bit harder and try to turn tension knob, while it is pulled out, in the opposite direction and it will then click into place one notch tighter and should hold the black ball on the cable firmly against the pulley. Let me know if this was helpful.

Adam

The original assembly manual is available directly from the manufacturer at bowflexcatalog.com, there is a product manual link near the bottom of the page.

There is a pop pin on the support at the end of the seat rail that must be pulled out to fold a Revolution up. You might want to download the complete operation manual, it is available directly from the manufacturer at bowflexcatalog.com. The product manual link is at the bottom of the page.

I have the same gym plus the assembly instructions in PDF format. I don't seem to find an upload button for the PDF file. If you email me at [email protected] I can send it over to you.

I am having the same problem with the right pully. How did you fix yours?

Hi there: You directed this question at me, but unfortunately this isn't my expertise and I am unable to provide you with a real solution at this time. Hopefully one of other experts will be able to provide you with a real solution. Thank you for using FixYa

Hello

Read the instructions. This may seem obvious but many of the problems that occur when putting together a Bowflex happen because directions are ignored or only referred to casually. Read each step completely

Loosen hardware. In some cases, problems can occur if you have made some of the hardware tight before it should be. The manual will instruct those working on the construction of the machine when they should and should not tighten bolts completely. Reading the manual completely will help you know when bolts should and should not be completely tightened.

You can get the manual on link below.

http://www.bowflexcatalog.com/media/products/Bowflex/PDF/assembly_motivator2_v1_m56577569831034660.pdf?PRODUCT%3C%3Eprd_id=845524441760718&FOLDER%3C%3Efolder_id=2534374302038012&bmUID=1192840776920

have you found a soultion to this? Im having the same issue with mine.

http://www.yorkfitness.com/store/PDF/901_Instructions_Compressed.pdf

Lay it on the ground, gently pull the hoop and turn the screw.

Hi Linda, i have the same 1983 Travelaire motorhome Econoline F-350 26ft and are in search of the Shop/owners manual ... Do you know where to find one ? I am located in BC Canada Reg 250-379-2971 [email protected] if you can contact me ?

This website has a fabulous guide to picking out a tennis racket!http://www.wilson.com/en-us/tennis/rackets/racket-selector/

English only on Fixya please.

Ozark Trail Tent User Manuals Download

ManualsLib https://www.manualslib.com > ... > Ozark Trail Manuals Download 66 Ozark Trail Tent PDF manuals. User manuals, Ozark Trail Tent Operating guides and Service manuals. https://www.google.com/search?q=Ozark+Trail+HK-5100+tent+instructions ..

Good day are you referring to the human body, if so the femur is located in the thigh.

It sounds like a controller error. Contact the maker for warranty support. https://www.google.com/search?q=Hover+1+Journey+foldable+scooter ..

Help in the link, but nothing specific to yours. They all work to a theme and there is full instructions for Spiniflex Albany and contains their contact details.

spinifex - Anaconda

anacondastores.com https://www.anacondastores.com > medias > Spi... PDF Read all instructions before set up. Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent. https://www.google.com/search?q=spinifex+huon+tent+instructions ..

Go to an auto parts store and buy a fiberglass kit. Resin, hardener and cloth. Clean and rough the area. apply a coating of mixed resin, then a layer of cloth. Let it dry and repeat a couple of times. After you are satisfied with that get a gallon of Elastomeric, you will find it at Lowes/Home depot. Clean the entire top and apply 2 coats with a brush or roller about 24 hours apart. No rain or moisture for a couple of days. Project complete, water proof roof.

https://www.google.com/search?q=ni-trac7+cross+trainer+user%27s+manual ..