20 Most Recent
eMachines T3656 Celeron 440 1GB DDR2 160GB Intel GMA 950 Windows Vista Home Basic PC Desktop - Page 8 Questions & Answers
How to reset bios password emachines d735 series?
I think you mean D725, not D735. I don't think that there is an eMachine D735 model. The D725 series is a laptop. Unfortunately, there is no easy solution. You will need to open the laptop, if you know how to do the reset. First disconnect your machine from power; this is an important step (otherwise the next step won't work); then open the laptop. Be very careful not to cause damage with static electricity from your body. After you open it, remove the CMOS battery for 20 to 30 minutes. That will make the motherboard forget all the CMOS settings. Reinstall the battery and try to boot-up. There used to be a software utility toolkit to reset the BIOS password, but it has now disappeared from the Internet because it could easily be used for illegal purposes. I hope this helps a little bit.
3/2/2015 10:08:19 PM •
eMachines...
•
Answered
on Mar 02, 2015
Emachines desktop won't go past windows can not complete insulation in safe mode restart, when I do it says the same thing again
If you have the original Windows CD, put it in the drive and try to boot to the disc. Each computer is different so there will be different methods to achieve this, but if you don't see a prompt to boot to the CD try tapping tab or F8 to see what other options you have for boot order.
If you can boot to CD, see if you can repair your startup, or run a check disk (depending on what version of Windows you're running). If you can give some more detail I can probably help you out better as to what you need to try. Best of luck!
1/29/2015 3:06:35 AM •
eMachines...
•
Answered
on Jan 29, 2015
How to read my email
There are many ways to read a email
- use internet browser like chrome , internet Explorer , safari and Firefox. Type URL in the address bar. Provide username and password. Click on the mail and read it.
- Use any e-mail client software like outlook or incredible mail . Configure it accordingly and read you e mails.
1/25/2015 7:02:20 AM •
eMachines...
•
Answered
on Jan 25, 2015
My emachines W3052 desktop won't start but powers cpu fan and the hard drive light is steady on
Hi there Andrew, we could really do with more information, such as. Has the pc been modified since you have had it ? upgraded, been seen by a technician etc, if not, and you can do this, I would suggest trying a power supply for test, but make sure it exceeds your system requirements. i.e if your current psu says 250 watts do not choose a supply less than 250 watts, make it the same or a higher wattage.
1/11/2015 11:00:44 PM •
eMachines...
•
Answered
on Jan 11, 2015
How to set up wireless network on windows XP home edition?
OK-- are you talking about simply connecting one computer to a home network, or setting up wireless network in general? If there is a wireless adapter in the PC and you already have a wireless network, the adapter will list all the networks in your proximity, and you choose yours. I can go into greater detail with that when I see your response.
Thanks
1/11/2015 5:24:38 AM •
eMachines...
•
Answered
on Jan 11, 2015
How can you check a computer power supply.
che cheapest tool that can effectively test a power supply is by trying a known spare power supply in its place. the cpu demands very precise voltage changes, wqhich would boggle a voltometer
1/3/2015 2:44:31 AM •
eMachines...
•
Answered
on Jan 03, 2015
Trying to restore emachine to factory settings.. When I go to emachines recovcery management, I get something saying "Empowering Technology is not ready. try again Later"
This is usually a sign that the partition on your hard drive that the recovery media is located in is corrupt. 3 reasons for this:
- bad recovery partition from the factory (bad image)
- Virus or spyware corrupted files to prevent usage which would prevent you from removing the problem with a recovery.
- Hard Drive issues (physical sections of the drive going bad.)
If you created recovery media, use those to recover your system. If you didn't, you may have to purchase recovery media from gateway for your model to recover the computer.
While it may cost you $30 to $50 dollars for the recovery media, it is a lot cheaper than the alternative of getting a tech to try to repair the partition or track down the virus or spyware.
The other advantage of recovery media is if the problems you were experiencing are hard drive related, you can put a replacement drive in and use those recovery disks to get your system working again.
10/1/2014 3:02:51 PM •
eMachines...
•
Answered
on Oct 01, 2014
Not finding what you are looking for?