20 Most Recent Dell OptiPlex 330 Desktop Desktop Computer - Page 2 Questions & Answers


Hello,
yes that is correct ! they are both two ways of input line.

Dell OptiPlex... | Answered on Nov 25, 2013


A Blinking Amber or Yellow power button means that the power supply is receiving power from the source but is unable to properly distribute it to the components. This can be caused by a defective power supply or a defective motherboard. Just to make sure that nothing else is causing the problem, remove any PCI cards like modem, video card, sound card, etc... Remove the memory modules and disconnect cables to CD/DVD drives. Look at the USB ports to see if any are damaged.

Dell OptiPlex... | Answered on Nov 02, 2013


you must follow the step indicate in the owner manual. get the support via online chat by the supplier.

God bless you

Dell OptiPlex... | Answered on Oct 22, 2013


Mansuri,
Unfortunately, dell does not have the wiring diagram for any computers available for download.

Thank You,
Dell-Jesse L
Dell Social Media and Communities

Dell OptiPlex... | Answered on Sep 24, 2013


Hi,
If the power light is blinking amber, the computer is receiving electrical power, but an internal power problem might occur.

Ensure that the voltage selection switch is set to match the AC power at your location, if applicable.

Ensure that the processor power cable is securely connected to the system board.

You an use the following link to know how to open the computer tower

User manual

Thanks for using Fixya
Proton

Dell OptiPlex... | Answered on Sep 24, 2013


can you precise you problem ??

Dell OptiPlex... | Answered on Sep 23, 2013


change power supply (SMPS)

Dell OptiPlex... | Answered on Sep 14, 2013


replace the power supply

Dell OptiPlex... | Answered on Sep 11, 2013


CHEZLEY, YOU SHOULD CHECK THE ELECTRICAL
WIRES AND THE ON/OFF-SWITCH.BE SURE YOU GOT NO
LOOSE WIRES.

Dell OptiPlex... | Answered on Sep 09, 2013


Click start control panel administrative tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers
If you computer came with a motherboard disk the drivers could be on it
or you might need to download them

Rather doing a driver hunt which can take hours

http://download.cnet.com/SlimDrivers-Free/3000-18513_4-75279940.html
Windows XP/Vista/7/8

it might take some time being a freeware driver solution
Note: it will find all of your outdated drivers

This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point.

Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated.
If you are able to get a screen
Click start control panel administrative tools computer management device manager scroll to display adapters + to expand you might see a yellow question mark ? or exclamation mark ! or a red x right click select reinstall drivers.

If you computer came with a motherboard disk the drivers could be on it
or you might need to download them.

http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
IE: motherboard name vga driver you might have to try a few times to get it right.

Dell OptiPlex... | Answered on Aug 25, 2013


Installing a fresh operating system is a good option, and there might be a feature in the BIOS to restore the system to factory defaults. Information on how to do this:

Windows XP: Dell PC Restore

Using PC Restore:

1. Turn on the computer.

During the boot process, a blue bar with www.dell.com appears at the top
of the screen.

2. Immediately upon seeing the blue bar, press <Ctrl><F11>.
If you do not press <Ctrl><F11> in time, let the computer finish
starting, and then restart the computer again.

NOTICE: If you do not want to proceed with PC Restore, click Reboot.

3. Click Restore and click Confirm.
The restore process takes approximately 6 to 10 minutes to complete.

4. When prompted, click Finish to reboot the computer.

NOTE: Do not manually shut down the computer. Click Finish and let the computer
completely reboot.

5. When prompted, click Yes.

The computer restarts.

Because the computer is restored to its original
operating state, the screens that appear, such as the End User License
Agreement, are the same ones that appeared the first time the computer
was turned on.

6. Click Next.
The System Restore screen appears and the computer restarts.

7. After the computer restarts, click OK.

or

http://www.user-guides.co.uk/download/dell/delloptiplex/dell-optiplex-330-reset-bios-password.html

Dell OptiPlex... | Answered on Aug 18, 2013


you can download driver at here
i hope this helpful

Dell OptiPlex... | Answered on Jun 13, 2013


you can download driver here
i hope this helpful

Dell OptiPlex... | Answered on Jun 13, 2013


If you want to resolve the driver issue in a quicker manner, try the Driver Detective Software and let it automatically detect & update the missing Dell PC drivers for you. This way things can be much easier. Regards!

Dell OptiPlex... | Answered on Apr 17, 2013


Dell Optiplex 330 Desktop Product Video http://www.youtube.com/watch?v=K3CDVOZMVpo DELL (OPTIPLEX GX520/320/330) http://www.youtube.com/watch?v=xbaDqnoDNP4 Unboxing & Setting up My Dell OptiPlex 330 http://www.youtube.com/watch?v=LX_-y8Y9WcY Dell Optiplex Computer Powersupply issues.MTS http://www.youtube.com/watch?v=dzSCXgvAFGg



Dell OptiPlex... | Answered on Mar 25, 2013


WARNING: Before you start troubleshooting remember that you are dealing with electricity that can KILL. http://www.kitchentablecomputers.com/static.php - rules Only work inside the computer case when the power has been switched off and disconnected. Never open the power source. Some of the below steps recommend removing physical parts within the computer. While in the computer it is highly recommend that you be aware of ESD and its potential hazards Test all leads that attach to your hard drive power and data cables IDE SATA the leads from your MOTHERBOARD TO YOUR HARD DRIVE make sure they have a secure dust free connections and are not faulty or just replace them they could be faulty make sure all leads that are attached to your dvd\cd floppy drives have secure connections and are not faulty or just replace them they could be faulty computers need power and data to travel through every working device to continue its cycle and have an end so any faulty leads will end up with a computer error even something as small as a faulty electrical or fan lead can cause you problems motherboard and a hard drive any leads between them will fail before your motherboard or your hard drive if its a flat ribbon 40 pin type IDE replace it this will be the first to fail check all electrical power input and extensions make sure they are securely seated even the cd/dvd floppy drives need to have current go through make sure these drives are working also check the Cmos battery and computer RAM modules make sure they are securely seated with no dust built up or in the sockets on some motherboards cmos batteries are soldered in Could be a problem with the Hard Drive or the Hard drives PCB http://www.onepcbsolution.com/

Dell OptiPlex... | Answered on Feb 15, 2013

Not finding what you are looking for?
Dell OptiPlex 330 Desktop Desktop Computer  Logo

201 questions posted

Ask a Question

Usually answered in minutes!

Top Dell Computers & Internet Experts

Ekse

Level 3 Expert

13434 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Alun Cox

Level 3 Expert

2679 Answers

Are you a Dell Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

OptiPlex Dell

  • OptiPlex Dell

Most Popular Question

bluetooth enable

  • Computers & Internet
Loading...