20 Most Recent Kyocera FS-1118MFP Laser Printer - Page 2 Questions & Answers

Check if you have put the little pwb inproperly or, in worst case, you have loose it. This pwb is in the left side of the processor unit. You will see a black circle tape near the grey tape of the grid cleaner.

check to make sure all your smtp info is correct (server address,authentication ,and auth user and pass)

Ccd: charged-Coupled Device, this part in the machine capture incoming light from scanned original and convert it into a digital signal.

from experience when ever I get a problem like this I generally delete the relevant driver and then reinstall it. check that the driver is compatible with your operating system. This is all I can suggest as it takes very little to corrupt a driver.

Zero cross error. Could be the power source PWB or the control PWB bad.

Error code relates to the fuser unit.Suggest that it is replaced.

Reset C6400 ERROR turn the power switch off and open the front cover. Then, turn the power switch on and press the system menu/counter key to enter the maintenance mode. Select Service setting using the up/down cursor keys. While pressing the start key and the # key, press the enter key..........Maintenance mode is entered. Select Maintenance mode using the up/down cursor keys. Press the enter key. Enter the maintenance item number U163 using the up/down keys. Press the enter key. Select Execute using the up/down cursor keys. Press the enter key. The fusing problem data is initialized.

Your FUSER memory must be reset by a Kyocera or Copystar Technician.

3200 indicates that the exposure lamp is not working correctly.I would recommend that you call a technician.

An 1118 process unit has a 100k life @5% average coverage in my experience the usually last about 85k when the waste toner is full it's generally near the end of life of the unit the fact that you're getting black marks in the pages says to me that there is drum decay which is also a signs of the process unit life nearing its end