20 Most Recent
Gestetner DSm645 Digital Imaging System - Page 2 Questions & Answers
How do you install an ethernet card on a gestetner DSM645 copier/
Are you trying to install an ethernet or "NIC" card in order to turn the machine into a printer? If so then you need more than a nic card. You would also need a ROM chip, Print controller, Hard Disk Drive and the buttons for the control panel.
If you are just replacing a NIC and expanding the memory then that is possible but the instructions to do so would be more than could be typed up here.
Do you know where i can get a ethernet card for a
Does you machine currently have the print option and the NIC has just gone bad or are you wanting to add print?
If your NIC is bad keep in mind this machine is the same as Ricoh 2045 or a Savin 4045. You will need to pay close attention to whether you have a 645SP or a 645ESP. The Print Controllers/NIC's are different for the E series.
Just search Ebay or Google for the Ricoh/Savin models and you cand find them. I just bought and installed one from Ebay for a customer last month($200).
If you don't currently have print then you need more than just the NIC card. You will need the Hard Drive, Controller, Chip, and control panel buttons.
How to code the DSM645 M5
this is not simple or easy. go to user tools.go to system settings. go to address book management. add new user. add code. allow which options to be used. hit ok to store.
Sc546 on a gestetner dsm645
Dear sir; SC546 the problem onheating unit either thermister connection loose or fusing unit connection loose, if there have any problem let me know, if this information resolve your problem, please be generouse give me a good rating.thank you.
Plz help
Did you try to diconnect the finisher or sotor from the copier? Is the error code a E 900. You may have a problem with your finisher. It can also be the hard drive on the back of the copier, it is used with the finisher. Try to unplug the finisher with the power off and tur it back on.Will that fix the problem for now.... Get back to us
Problem to print
hi!!!
i have one copier i have the same problem
clean the drum with the tissue "warning don't clean with the wet cloth or wet tissue
just use only dry!!! it may cause the drum damage on it
clean it with the dry tissue
or
replaced the drum
my be the drum expired due to ther amout of copies
Gestener C764ond
maybe yess!!
but the your copier will not print original one
you use a bukl toner so the copy of it is lighter than the original one
Making black copies
Depends on how you scanned it by having the lid opened and no paper on the scanner. Are they totally black?
WRONG PAPER FEED
sounds like the paper size you are using is not set for that type.
If it is Letter you are using make sure you have letter in the tray, and depending on the machine it must also be in the same direction. If it is letter the long way make sure it is in the tray the same way.
How would I identify faulty fault sensors in gestetner MP2501L copier and replace them?
You can't. As I said you need the service engineer with the laptop. These Office Machines are NOT consumer serviceable. They hook up the laptop with the Ricoh software and it interrogates the computer, the mainboard and everything on it. The error message you get is from the brains inside it..Original question and answerhttps://www.fixya.com/support/t29802178-am_posting_again_stripped_off_gestetner..
Am posting again. I stripped off gestetner MP2501L 8 times due to problem ' see instructions on right side to solve' but same. No paper inside. What is the actual problem.
Hello Christopher
Are you in the Philippines? I notice that your copier has changed from Ricoh to Gestetner? We are a North American website.
This is a commercial office machine, and from my experience of them is that on the right side you will see on the inside, a list of instructions for where to check for obstructions. It seems you have already done this 8 times! Frustrating! Try this;
Open the right side cover, unlatch all the bits at that side.
Open the straight pass door on the left side.
remove ALL the paper drawers.
Get a powerful flashlight, look in all the spaces you have just created, especially at the edges of drawers and paper pathways. You are looking for a tiny piece of paper that one of your employees carelessly left behind after a paper jam.The one I found was right at the back of the straight pass door. When a sensor is covered, it creates that message.
If that fails, Ricoh will have to come and attach their Laptop scan software to it which will tell which sensor is obstructed or has failed.
Sc 569 for ricoh mp 5500
sc 569 is the pressure roller contact sensor error Troubleshooting Procedures: 1. Check or replace the harness of the pressure roller contact sensor. 2. Replace the pressure roller contact sensor. 3. Replace the pressure roller contact motor
Not finding what you are looking for?