20 Most Recent
Gestetner DSm645 Digital Imaging System - Page 3 Questions & Answers
SC 569 Error code in MP 5500
sc 569 is the pressure roller contact sensor error
Troubleshooting Procedures:
1. Check or replace the harness of the pressure roller contact sensor.
2. Replace the pressure roller contact sensor.
3. Replace the pressure roller contact motor
Ink idling problem in gestetner dx 2330 copy printer
Hi Hope this helps.The metal gauze filter (see image) behind the input nipple on the drum unit may become blocked with congealed ink deposits causing the ink not to feed at full flow.Strip and clean the blocked gauze filter in the Ink Supply System.
Gestetner DX 4542 not supplying ink
Ink pump motor may be not working first you need check your cp is original.. After that remove drum unit disabled the unit and clean ink detection sensor and ink pump motor
Am having a problem with my gestetner 5308b eror e o2
E02
Paper Table Drive Failure.The paper height sensor or the table lower limit sensor does not turn on within 7 seconds after the table drive motor turns on.
point to check-
Paper table drive motor Paper height sensor or table lower limit sensor. Mechanical interference with the paper table drive
Gestetner 5308 error code E-24
SC code:E-21 Paper exit timing sensor remains off
E-22 2nd feed timing sensor remains off
E-23 Master eject position sensor remains
E-24 Feed start timing sensor remains off
point to check- Feed start timing sensor
dirty sensor or failed, air line to get dust off my first step.
Not finding what you are looking for?