Polaris 800 Twin Sportsman Ride on Toy - Answered Questions & Fixed issues
Peg perego polaris 700 4-wheeler wont run
Had the same problem. Once a year open (if possible) gas throttle and gear shift. Use a standard lubricating spray on everything. (power off first) shake and use compressed air to spread. Potmeters are dryed up and dont get signal. Let it dry after you sprayed it some times. Make shure you move parts. Connect and should be ok.
How do i fix a peg perago sportsman 700 that wont start
first of all check for at least 12 volts from the battery and the charger, you can test this using a multimeter, if the battery doesn't show any volts, lift up one side of the blue plastic housing on the top and verify that both the positive and negative wires are plugged in
Motor replacement instructions
1. Remove the center caps from the rear wheels2. use a 13mm wrench and loosen the bolts3. remove the rear wheel4. pull the motor and gearbox out and disconnect wires to the motor5. remove the two screws that hold the motor to the gearbox
My charger lights do not come on
first of all check for at least 24 volts from the battery and the charger, you can test this using a multimeter, if the battery doesn't show any volts, lift up one side of the yellow plastic housing on the top and verify that both the positive and negative wires are plugged in, if its the charger, you can order a new one here http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=170880438033&ssPageName=STRK:MESE:IT
How to replace motor and circuit board in my peg
the motor is easy, just pull off the plastic hubcap with a flat head screwdriver, then remove the nut and bolt with a 13mm wrench, then pull off the wheel and gearbox and disconnect the wires from the motor then its just two screws that hold the motor on, for the circuit board it depends on wether you got the new style with the poly switches on the board or if they are seperate
Not finding what you are looking for?