Kodak AiO Home Center needs to be ran as Administrator

Right click on the KODAK AiO icon - select properties. Click on the compatibility tab and check "run this program in compatibility mode for:" and select your operating system. Then check the box for "run this program as an administrator". Click apply and run your KODAK AiO Home Center program. No more 2070 error.

To resolve this error code:

1. Close Home Center Software.
2. Go to Start>Computer.
3. Show hidden files and folders:
• Select Tools>Folder Options.
  
  NOTE: If the Tools menu is not available on the menu bar, press the <Alt> key on the keyboard, and then a menu bar with the Tools menu will appear.
  
• Select the View tab.
• In the Advanced Settings, select Show hidden files or folders.
• Select Apply.
• Click OK.
  
4. • right click on the Kodak icon on your desktop and select properties. •Then on the general tab select find target.
   
5. Right-click AiOHomeCenter.exe.config and select delete to remove the file.
   
6. Hide hidden files and folders:
• Select Tools>Folder Options.
• Select the View tab.
• In the Advanced Settings, select Do not show hidden files or folders.
• Select Apply.
• Click OK.
  
7. Run Home Center Software to run as an administrator:
• Right-click the Home Center icon, then select properties.
• Select the Run this program as an administrator check box in the compatibility mode.
• Click OK.
  
8. Open Home Center Software and print or scan a job.

try to unplug replug the usb cable of the printer.

You may also go to control panel printer and faxes and look for the printer of your 5300 now if you see 2 icons delete them both then exit to printer and faxes. and unplug/replug your USB cable then restart computer.

If this issue not solve try to uninstall the software and download the clearutility kodak.com/go/clear. then after doing this restart computer.

On some vista setups the Kodak Software needs to be set to run as administrator

1. Right click the Kodak AiO Home Center icon and select 'Properties'
2. Select the 'Compatibility' tab
3. Make sure the 'Run as Administrator' box is checked
4. click apply and ok.

Hope this helps

I needed to reload my AiO Home Center software and no one seemed to have the correct procedure. Maybe if you remove & reinstall yours it will resolve your problem. This procedure worked for me on my XP-machine:
1. got to Control Panel/Printers&Faxes and delete the printer
2. go to your Hardware/Device Manager/Universal Serial Bus Controllers, right-click on USB Composite Device and select Uninstall
3. go to Control Panel/Add/Remove Software and remove the EasyShare software
4. disconnect the cables from the Printer
5. download from Kodak.com the program "install_aio.exe"; run the program
(I selected only AiO+EasyShare+Software Updater to load)
6. followed the prompts after the sw installed to reconnect the Printer cables
7. rebooted

WORKED for ME !