One For All URC-3220 Code Entry

One For All URC-3220 Code Entry



To program your One For All URC-3220 remote control to operate your TV you can use the direct code entry function.

To enter for a code for your TV follow these steps:

1. Turn on your TV.
2. On the remote, press the TV key once.
3. Press and hold SET until the LED blinks twice, then release SET.
4. Enter the first four-digit code from the code list. The LED will blink twice. If it does not blink twice, go back to step 2 and try the same code again.
5. Aim the remote at the TV and press POWER. The device should turn off. If it does not turn off, repeat steps 2 through 5 with the next code in the list.