DirecTV Remote Control Code Entry

DirecTV Remote Control Code Entry



To enter a control code for your TV using your DirecTV Remote Control, follow these steps:

1. Turn on the TV.
2. Locate the 5-digit code for your TV. (See DirecTV Remote Control Code List, page 14.)
3. Slide the MODE switch to the TV position.
4. Press and hold the MUTE and SELECT keys at the same time until the green light under the TV position flashes twice, then release both keys.
5. Using the number keys enter the 5-digit code for your brand of TV. If performed correctly, the green light under TV flashed twice.
6. Aim the remote at your TV and press the PWR key once. Your TV should turn off. If it does not turn off, repeat steps 4 and 5, trying each code for your brand until you find the correct code.