I have fisher&paykel dishdrawer and f1 problem. what doew it means;

Question edited for clarity and add maker.
Question moved to a better category.

Not draining properly. Videos may help.

Excess Water in the Drawer

Fisher & Paykel https://support.fisherpaykel.com > article > Excess-Wa...
Oct 16, 2023 - Possible Cause, What to Do. Drain hose is crimped, bent, or blocked, Straighten any kinks along the hose that drains water from your ...

Missing: dd60scx7 ‎bottom

Fisher & Paykel DishDrawer Questions & Answers

Product Review https://www.productreview.com.au > listings > q-and-a
When running either of my drawers it pours water onto the floor from out of the bottom. Seems to happen in the rinse cycle but not sure. Turned the inlet off ...

Service Manual

Home Appliances Online https://www.homeappliancesonline.co.nz > site PDF Always clean and tidy the DishDrawer™ and work area after service is completed. 1.1.4 Isolate Water Supply. Turn off the water connection tap before servicing.

Fisher & Paykel DishDrawer 80898-A DD60SCX7 FP AA

Steve's Appliance Spares https://www.appliancespares.nz > blogs > fisher-paykel-d...
Parts Manual for Fisher & Paykel DishDrawer 80898-A DD60SCX7 FP AA Click Here for Exploded Diagram and Parts List to find the Location ID of the part you're ...
https://www.google.com/search?q=dishdrawer+dd60scx7+water+in+bottom

..

Flood Pan alert

Troubleshooting an F1 Error in a Fisher & Paykel Dishwasher

https://www.hunker.com > ... > Dishwashers
The F1 fault code indicates that water has filled the flood pan beneath the bottom drawer of the machine. This can happen if the drawer isn't shut all the way, ...

Hi,

from what I'm seeing for the dishwasher, an E1 error means that the door is not properly closed. So, please look at the door of the machine to make sure that nothing is broken or that the dishwasher isn't too full. Thank you.

u-tube link

http://www.google.co.uk/url?sa=t&rct=j&q=&esrc=s&frm=1&source=web&cd=2&cad=rja&uact=8&ved=0CDYQtwIwAQ&url=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3DUXzuJvKIIgU&ei=3jBvVNKRB4_oaOLogtgC&usg=AFQjCNGR-ByvvaKhe5HQZlETz9m1KG-z1A&sig2=li9KsESvG8qn0DWW6GPzDA

F5 is the fast and rinse LED
It simply means the lid motror current is to high during the start - The lid is jammed up or down. Or the electronic controller has failed!!

The manual states that fault code F1 means that the flood switch has been activated. They recommend turning off the water and power to the unit and calling them. Their phone number is: 1.888.936.787

http://www.fisherpaykel.com/vault/pdfs//pdf_usecares/529543CDD605userguideUSCAw.pdf

will need a description of the problem. Some of the common fault codes are F1, F2 and F3.
All these fault codes stop the dishwasher and will not go away until the cause is removed. Please indicate the problem you are experiencing.

http://www.scribd.com/doc/6462163/DD601V2-Manual#fullscreen

Water has collected at the base of the dishwasher under the drawer.
This triggers a flood switch and causes the F1 error.

Turn the mains power off and extend the drawer out as much as possible. Take towels to dry the base from inside. Also use hair dryer ot dry out the flood switch mounted at the base.

Turn the power on and see if there is any difference. The cause of water collection could be many. Foam in detergent or kink in drain hose or drawer door gasket leaking etc.

the flood switch at the base of the dishwasher has been activated. This means moisture has gone into the base (under the drawer).

Turn power off, and extend drawer to expose bottom back of the base. Use towels / hair dryer etc to dry it out.

Likely causes are - you used a wrong detergent (too much foam) or the hoses at the back are leaking or the actuator arm that supports the hoses when you pull or push the drawer is broken and the hose is kinked.

Hope you can fix it.