Power lock enable

If you have a apple store account and wifi, you hold down the Option and the R buttons while booting until the apple symbol appears, follow menu from there to install proper OS

Those are Diagnostic indicators that point you to the possible cause. The padlocks will have a number ( Turns on when the numeric keypad is enabled.) or capital letter(Turns on when the uppercase letter function is enabled.) or arrow key(Turns on when the scroll lock function is enabled.).
According to those indicators you either have a bad memory module or your CPU (processor) is bad.

You may have enabled the child lock feature, try pressing the Return, Enter and Power buttons together to toggle the lock off. If this is disabled and you still can't open the tray, turn off the unit and unplug it. After 30 seconds or so, plug the unit back into the electrical outlet. Attempt to open the tray. If this does not solve the problem, try pressing Power + Stop + Eject buttons together. Also try pressing Disc1 + Stop + Eject simultaneously (if a disc1 button is on the remote or player).

If the error message is t - L C K or persists after trying all of the above steps, then you need the unit serviced.

The manual is available at the Sony support site: http://esupport.sony.com/US/perl/model-documents.pl?mdl=DVPSR200PB .

I hope this helps.

Cindy Wells

Remove the power chord. Remove the battery. Remove all the external peripherals. Press and hold the power button for 15 seconds. Put the battery back in. Turn on the laptop.
It should work fine now.

if not turn the laptop upside down then slap it lightly 3-4 times
this will then surely fix the problem and if not then take it to the service center.

This VP2365WB does have built-in speakers. http://www.viewsonic.com/products/desktop-monitors/lcd/pro-series/vp2365wb.htm

Please read your user manual: http://www.viewsonic.com/products/desktop-monitors/lcd/pro-series/vp2365wb.htm

You need a set of powered speakers sytem.
http://s807.photobucket.com/home/budm/allalbums

Hello,

The Viewsonic VX2235WM has a known issue with the power supply going out. The flashing power light or not turning on is the classic symptoms of this issue. Check out our web site at: www.ccl-la.com. We have a step by step repair guide posted that will guide to doing the repair yourself. It involves changing a few capacitors on the power supply. If you can solder then you should be able to do the repair yourself. If you don't want to do the repair we do offer a repair service for $35 plus return shipping. If you have any additional questions just let us know at: [email protected]

I hope this helps, if so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

The blinking light is just a status for the caps light. If the unit does not power on or boot , you may have
A) a low or bad battery, Take the battery out and try to power up just by plugging the unit into the outlet.

B) If that does not work, You may have a loose DC connector on the system board. Unplug the plug from the outlet, then slightly wiggle the connector at the back of the laptopwhere the adapter plugs in. If it moves , the connector is loose on the MLB.


The blue lights located above the keyboard indicate the following:

Turns on when the numeric keypad is enabled.

Turns on when the uppercase letter (caps lock) function is enabled.

Turns on when the scroll lock function is enabled.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe


I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

I just had the same problem, the battery went dead on my jimmy did not have enough juice to release the locking mechanism.you might try battery charger on high power or try jumping it if possible. a new battery solved my problem. hope this helps. mark

IF IT DOESNT TURN OVER TRY AVEING YOUR STARTER TESTED THEY USELY WILL DO IT FOR FREE ,NEXT IGNITION SWICTH IS POSSIBLE , ARE YOUR BATTERY MAY HAVE A BAD SELL , IF THESE DONT WORK TRY TURNING YOUR ENGINE OVER BY HAND TO SEE IF ITS LOCK UP ?

This is a common and annoying problem. Your router is running and connected, but they are either not using the same encryption keys or else you have some other setting incorrect (encryption type is a common one).

Turn off the laptop's wireless connection and enable its cable (wired) connection. Connect the laptop to the back of the router physically with a network cable. In a browser type 192.168.1.1 (or other similar number - check your router's quick start guide). Log into the router and go to the WIRELESS SETTINGS. Write down everything you see (channel, station ID, encryption type and key, and whether MAC ADDRESS LOCKING is on (if it is turn it off for now)). Take these settings, reverse the process on your laptop and try to connect wirelessly with the new settings. They have to be exactly the same

If it all works, you need to go back into the router and enable MAC ADDRESS LOCKING after giving it your laptop's MAC ADDRESS, enable the highest standard encryption both the router and the laptop support, and turn off station ID broadcasting if possible.

If you still cannot connect wirelessly, connect again through the wire connection, and turn off encryption, turn off MAC ADDRESS LOCKING, and try again.

Good luck...