Buy a sansui 6 inch tv vcr...

Check whether the input selection is set to A/V.

Hello, this should be the correct model number of the remote: 07660CG020

Here is an ebay auction for one:
http://cgi.ebay.com/07660CG020-REMOTE-CONTROL-for-TV-VCR-Combo_W0QQitemZ120378205047QQcmdZViewItemQQptZLH_DefaultDomain_0

IT IS BETTER TO BUY DVD PLAYERS OF COMPANIES LIKE SONY , PHILIPS , OR TOSHIBA

connect the cable from the tv to the "IN" of the vcr. then connect the "OUT" of the vcr to the tv. play the program on your tv and push record on the vcr. you have to watch what you're recording, but at least it will record.

CLICK HERE for your user manual.

There are 4 ways to enter the code.

Thanks for using FixYa - A FixYa rating is appreciated!!

You can try the codes for Orion, Emerson, and RCA. Call the number on the back of the set to see if the original remote is available.

Use the SLP speed setting.

Try the codes for Orion, Emerson and RCA as well as Sansui. Good Luck!

either use an old vcr to act as a signal converter or go buy an "rf converter" from an electronics store to change composite audio/video signal to channels 3 or 4 and that should do the trick.

Please connect video out and audio out of your TV to video in and audio in of your vcr respectively.Switch on the TV and the VCR.Put the VCR on camera or AV mode.Press the record key on VCR.The VCR will record the programme being shown on your TV.Thanks.