The exact size for this and almost all visio TVs are:
M4 x 35mm at .70 pitch
Hope this Helps the next guy/gal that looses their screws...
Thanks Brian. Worked perfectly for my older Vizio 55 inch.
This HELP just keeps on HELPING. I have not one but two Vizio HDTVs, a 24" and a 32", which both shipped without these screws. My local Ace Hardware store had the screws for the specs which you gave and these fit perfectly in both sets. Thanks again Brian.
×
Thet are Metric screw M5 or M6 about 35cents at HD, Lowe's, ACE. The length can be figured out by using a small stick to find out how deep the holes are.
Basic LCD monitor and TV troubleshooting guide:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm
Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Parts: www.interliquidparts.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Or www.digikey.com, just make sure to use caps with low ESR, 105c, high ripple current and long life rating such as PANASONIC FM or FC series.
18,951 views
Usually answered in minutes!
The exact Size of the Screws needed are M4 x 35mm .70 Pitch
Hope this Helps the next guy. Took 3 trips to the Hardware store to get the right ones.
You can find them at the following website:
http://store.richspsxparts.com/newvivofh...
×