Lg fuzzy logic model wf-t7014pp. seems like spinner belt is worn, loose, how do i replace it or tighten the belt

HELLO,

It's not too difficult to troubleshoot washing machine problems. When your washing machine won't spin, there could be a number of possible reasons, but all you have to do is find the right one. A drum that won't revolve and spin is one of the most common washing machine problems and in most instances, you'll be able to find the cause without spending money on a plumber. Once you've found the cause, you should also be able to manage the repair yourself to help keep repair costs down.

Drive Belt,
Although most people will suspect a problem with the drive belt as the reason for the drum not spinning, it is not always the case. However, the drive belt is very easy to check. With the door of the washing machine open, try turning the drum. Usually, there will be some resistance. If the belt has broken, the drum will turn more easily. Where this is the case, you'll need to open up the access panel, with the machine unplugged, to replace the belt. This is a relatively small and easy job.

NOTE PLS.ALSO

Motor Coupler,
Some manufacturers use a small motor coupling made of rubber and plastic. It's mounted to both the motor shaft and the transmission of the washing machine and can wear out or fail over time. A visual examination is the easiest way to troubleshoot the washing machine of this problem. If the motor coupler has failed, you'll have to replace it. Again, this is a small and simple job.
THANKS

the motor id mounts are slotted so lossen those and you can adust the belt tension that way, warning the belt id supposed to be loose if over tightened you will ruin the bearins in a very short space of time

if it does not rinse its a different case,,,,,nd if it does not spin is another ,,,check on the door lid,its a magnet,,,,,,,,,,,,,,,,,attached the washer pic ,,,so i can tell u what to do............
if u have a magnet tryputting it between the door and its main program board,,,centre nd try

I have an LG WF-T502C T552.
It makes a loud squeal noise on the spin cycle.
I am thinking of replacing the belt. Is it possible it could be the bearings or the transmission?

Call LG's support line, they have excellent customer service.

I have a LG washing machine WTF655TH, it has stopped working, its full of water, but when you push the one button, it trips, how do i get it working again

i had this problem last week at a customers house. first buy some thread loctite, then remove screw. put loctite on thread not 2 much, tighten back up. leave over night. should fix problem. please reply if u need more help. good luck

Are you sure it is the bowl and not inside the pump with the impellar hitting it on spin cycle? I just had the same problem and had to remove a dime from inside the pump.

call 0800 54 54 54
or visit them in Barbra Road in Isando neer the N12 crossing