Lamp unit Type: Y67-LMB The Lamp Burnt - Toshiba 50HM66 52" Television

Download it from


http://support.magellangps.com/support/assets/manuals/OM_112_0044_001_A_9250.pdf


http://www.magellangps.com/Store/RoadMate/RoadMate-9250T-LMB


Introducing the Magellan RoadMate 9250T LMB


Magellan 9250T LMB User Manual

Check that the lamps have any obvious indication that they are burnt out, such as a scorch mark or otherwise. Careful not to break them if attempting to remove them. With the lamp removed you can test them for continuity (like with any other type of light that has a filament).

Vacuum that plastic and all around it but don't touch it. This solution worked

Unless it is an updated replacement it could cause the problem. Also if you get the set on some of these had a "quick on" feature where when the set is turned off the lamp dims but does not shut off-----this shortens the life of the lamp---in customer menu make sure it is off.

SD TECH

Step 1.- Unplug the TV from the wall outlet. Let the TV cool down for a good 15-20 minutes.

If these are little dots/pixels that are one color or black, I believe it is the optical block that is the problem. Unfortunately, the cost of it is the most expensive part in the set. With the cost of parts and labor I estimate it costing around $800.00 to $1200.00 to repair. With the cost of LCD units coming down in price, It hard to invest that much money into it.
I hope this helps,
Skyassoc

Open a reduced window for both source and destination on your desktop
LMB click on file icon folder you wish to transfer, keeping the LMB down all the time
drag the file to the destination folder.

or

LMB click on file icon folder you wish to transfer, go to top of window LMB click "EDIT" then sellect "COPY" then LMB in the destination window LMB click "EDIT" then sellect "paste".

Toshiba Lamp 75008204 Y67
lamps-dlp.com$169.95 Toshiba Warranty 180 Days In a Toshiba Box!

You need a new lamp. simple easy fix. just cost's a bit. Thats the part number for your exact tv. You can probley find it cheaper on E BAY

Y67-LMP-75007091 Call FOX Lamps 129.00 Make sure you give them correct Model number its on the back of your TV 1-800-227-5369 or Try Mats 1-800-628-1118

Most of these type lights do not have a plug. I am assuming that you want to replace a burnt out lamp.

Here's what you do. Remove the assembtail lamp assembly. It is usually held on with 2 or 3 phillips head screws. If the problem is a burnt out lamp, the lamp assembly will unscrew from the unit by turning it counterclockwise about a quarter turn. Take the bad bulb to an auto parts store and get a replacement. The bulb will only fit one way into its socket. Then take the socket with the new bulb and insert it back in the housing. Again it will only fit one way. remount the tail light assembly.

If the actual plastic tail light assembly is broken or cracked remove the lamp assembly as described above, take the broken tail light to a dealer and ghet a new one. They are expensive. I just replaced one for my 95 F-150 pickup and it was $40.