At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Most makers specify the transformer as a safety part which can only be replaced with a manufactures specified part. Contact them for the correct part. If you can't get one from them, then replacing it with a none recommended part, could pose a fire risk.
If you are looking for the specifications for this transformer to replace it, then don't bother. Makers like transformers replaced with exact parts by them, for safety reasons. You have the part number just find out who has it, or contact the maker for a supplier.
If you just want to know the voltage a multi-meter will tell you that.
Hello. I appreciate this is an old post but in case someone still has one of these.I just got one in for repair today. Get two rca connectors and short them out so the input is grounded. If this fixes the problem then it is coming in through the inputs. If not then the two large filter caps need replacing. Another problem these units have is the glue that holds the small filter caps etc corrodes the board after a few years. Clean it off, repair the tracks and coat the board with pcb lacquer.
check your output stage for bad speakers cable or bare wire of cable touch the body of amp----short circuit speaker cable----bad speaker it self------ bad input cable or defective input device . disconnect all and check if it is ok---start to connect one by one from input to outputs------if all above failed you must contact service center for help.
×