My ricoh 600 AP printer is over 4 years old. it recently started 'skipping' papers. It prints the first perfectly fine but after the first page, it does not leave any margin in the paper. it looks as if the paper is not rolling properly. Is this a common problem? How can i fix it? Thanks for your time.
1.Remove tray and clean the feed roller with cloth and 'fantastic" or windex. Make sure you rub dry after cleaning. All of this should be done with a ragg not a towel. You don't want lint on your roller.
2.make sure end fence (back guide in the tray) in in contact with paper.
May be the feed clutch is out of position
The feed clutch for the feed tire is stuck on ... Replace the clutch
891 views
Usually answered in minutes!
×