I have a Necchi 3205 Royal series machine. I was sewing denim and it jambed and bent the needle. I replaced the needle and now it won't pull the bobbin thread up. I have tried several different needles but that doesn't seem to help. Help would be very appreciated

If you do an internet search for "necchi 3205 threading" As an 'image', you will find many images with either the 3205 or other similar Necchi machines. I tried to upload an image to show you, but was unable to get it uploaded. But you will have no problem finding a detailed image online either of the 3205 or one that is very similar.

Contact a vendor:

https://www.sewingparts.co.uk/machines/clip-on/necchi-3205.html

https://www.sewingpartsonline.com/necchi-3205fa-sewing-machine-parts.aspx?filter.ptype_gmcfeed_1=%20Machine%20Needles&sort.ss_cat_sort=desc&index=22

Search for:

Make Model threading
or
Make Model manual

https://www.sewingpartsonline.com/instruction-manual-necchi-3205fa-sewing-machine.aspx


Even if not your particular model, basic machine threading is very similar from one to another. Just be sure to ALWAYS RAISE the presser foot when threading the top thread---and change the needle often.

How do thread Necchi Royal Series Model 3205 sewing discussion topic...

How to Thread Necchi Sewing Machine

How to thread Necchi model 535 FA sewing machine now with captions

The top thread breaks

1. the needle thread is not threaded properly

2. The needle thread tension is to tight

3. The needle is bent or blunt

4. The needle is incorrectly inserted

5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew

6. the threads were not drawn to the rear after sewing

7. The thread is either to heavy or to fine for the needle

8. Try a different spool or cone of thread

some sewing machines can not sew denim good,
here are some suggestions
since a needle was broken & replaced--if the needle has a flat side it goes to the back of the machine
make sure the needle is inserted correctly & pushed up inside of the needle holder & the needle screw tightened correctly
is the correct needle being used for the thread & fabric being sewed?
when sewing denim, a denim needle is needed, I usually purchase mine at walmart, I have 2 necchi sewing machines & the denim needles work just fine on my machines.

if none of the above suggestions help then the machine could be out of time, just because of a broken needle. only a repair shop has the correct tool to fix this problem

I could not find a free, PDF manual. But I did find this manual you could purchase for about 15 bucks.

Make sure the stop motion wheel is tight, make sure you do not have any thread stuck in the raceway area if you get a buzzing sound from the motor

Hi! I found your manual at http://www.sewusa.com/Sewing_Machine_Manuals/Necchi_Manuals/3205_Instruction_Manual.htm
Happy Sewing!
Robbie

- check ifu are using same needle model.
- check hight of needle bar is ok
- check timming between needle bar and hook.
- check if your material is very stritch or no
- check blad point of hook is ok or no
best regards

I have the same machine. Try replacing the needle, it could be slightly bent and not be in position to pick up the loop from underneath. A good de-fluff may help too.