Westinghouse lcd 26 inch

A sound bar fixed that on my 60" Vizio. But in your case the sound bar may be more valuable than a new TV.

Sounds like the Display Cracked. This is not the first time I heard of a display breaking on Westinghouse and Poleroid LCD TV's as they are made in the same plant in China. Sorry to say a new display will cost more than a new TV.

Hello, you might have to replace the main board because you might have damaged the speaker plug. Make sure also before you make any decision you check the in the menu under the audio tab that the speakers are set to internal and not external. If you would like to find more information on the main board please send a quick email to [email protected] or to myself at [email protected] so I can provide you with part#, price, and availability of the board. You can also visit www.shopjimmy.com for prices on the main board for this model. Please rate my comment if it was helpfull to you.

http://www.westinghousedigital.com/manuals.aspx

You probably have a bad solder connection or an intermittent part failure in the right audio amplifier or its source circuitry. Put in a call for warranty service.

Hello, it seems like you need to replace the power board on this unit, you can find the part by sending a request to [email protected], please make sure to include the model#, serial#, and TW#, all located on the back of the unit. You can also ask to have a technician give you a call so he can assist you a bit more on how to go about changing the power board.

You dont need a correct one you just need one wall mount that can fit 26 - 30 inch search wall mount on trademe or ebay realy cheap and they can ship it down to you thats the cheapest way

Unfortunately, we have the same problem. We hear popping and our sound goes lower. It is not the cable box for us, it's definitely the TV; however, it happens, on our set, after its been on for a few minutes and then goes away after half an hour or so -- however, this evening its been happening for the past hour and the TV has been on for the evening.

seems to be related to the backlight setting. If the backlight is less than full - i hear a humm/whine thru the speakers.

Design flaw!

you should check the outline ctrl..for a mic...it could produce a noise...if you have your speakers connected to pc...check the position of the plugs and the volumen of mic put in down...