I have the Nexxt Premium front loader. the main front door gray gasket has a tear in it at the bottom which is causing water to drain out during the wash cycle. How and where do I get the new rubber seal for the machine. Thank you

It is possibly the motor brushes. worst case scenario is the motor complete.

Normal 0 false false false MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman"; mso-ansi-language:#0400; mso-fareast-language:#0400; mso-bidi-language:#0400;} To manually unlock the door lock system, perform the following steps:
1. Unplug the power cord from the outlet.
2. Remove the lower toe panel.
3. Reach up along the inside of the front panel and locate the bottom of the door latch assembly.
4. Located on the bottom of the door latch assembly is a teardrop shaped tab. Gently pull the tab down approximately 1/4 inch, or until a click is heard.
5. The door may now be manually opened.

Pl rate me nice if helped, thanks.

Check the door seal for tears and the drain boot from tub to drain boot for anything that might have put a hole in like a piece of metal from an under wire bra which front loads will spin so fast that the wires come out of the bras.

Check the filter, which is located at the bottom front right of washer behind a flap or drop down cover.
Unscrew anti-clockwise to remove and clean.
Please rate my solution.
Thankyou.

This video will show you how to change a door seal on this Bosch front loader washing machine

Bosch Nexxt Premium WFMC6400UC Front Load Washer mould on rubber seal.
This video will show you how to change a door seal on this Bosch front loader washing machine.
we have all bosch repairs in our channel.

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.

Inspect water pump. Sometime debris will move around causing drainage problem.

Always check to see if the water waste (located normally at bottom right) has no foreign objects in their such as bobby pins, coins etc It has happened to me 3 times (first time cost me $150)

BoschNexxt Premium WFMC6400UC loose gasket.
This video will show you how to change a door seal on this Bosch front loader washing machine and how to get the parts!

we have all
bosch repairs in our channel

Please remember to subscribe to our YouTube channel for all appliance tutorials

a 4 THUMBS rating is appreciated for answering your FREE question.

This is a poor design. Mine became so stained that I replaced it. Unfortunatly the replacement part is for a newer model and the retrofit is a little different than the original. The seal didn't let the door close all the way and I have to push against it to get it to lock. I am hoping the gasket will loosen up over time. Even with that the drain is a water collector. I spray mine with a mildew product after washes, or leave the door open so it will dry out, and I occasionally wipe it with a rag. I hope Bosch changes their design.