Question about LG WM-2277HW Front Load Washer

1 Answer

My lg tromm wm2277hb wont stop displayng the ue code. I've changed loads, cleaned the filter, called tech support and they had me perform a hard reset by unpluging the machine and press and hold the start button for 30 sec., plug back in and press start. That worked for awhile, but now its gone bad again

Posted by on


1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert who has achieved Level 3.

  • Master
  • 438 Answers

Suggest try same again.
Modern appliances have a zillion circuit connections of which any one of them can develop a "bug".
Unless it is under warranty it's usually less trouble and cost to simply replace it.

Posted on Jan 02, 2018


6 Suggested Answers


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017



  • 706 Answers

SOURCE: LE Error Code on Tromm page 18 of this service manual elaborates on the LE error code and what to check.. Hope this helps you..

Posted on Sep 20, 2008


Carl Schulzetenberg

  • 1543 Answers

SOURCE: I HAVE A LG TROMM WM2277HB and its not spining

First try unplugging the machine for a few minutes and then retry a cycle. If you still get the LE error:

The Hall sensor (part number 6501KW2001A) has failed. The hall sensor is rather easy to replace, and is covered by a seven year part warranty (in the US). Take the back cover off. Take the big nut off and remove the motor rotor. Remove the bolts holding the motor windings. Remove the electric plug on the sensor and unclip it from the motor winding. Snap new sensor on and reassemble. Usually takes under a half hour. On a difficulty scale of 1 - 10, it might rate a 4. This should be a Fix-Ya for your machine, and at basically no cost!
In the US, find a service provider using your zip code at or call LG at 800-243-0000

Posted on Jun 12, 2009


  • 22 Answers

SOURCE: Error Message and Tub not spinning

Depending on how many clothes are in the washer you may a unbalance error

Posted on Jul 31, 2009


  • 22 Answers

SOURCE: My washer is marking LE.What does that mean?

This is a motor overload. Could be too many items in the barrel. I have had this code in the past and took some items out and it went away. I still think there is an underlying issue with the hall sensor or the motor altogether.

Posted on Aug 01, 2009


  • 574 Answers

SOURCE: my dispenser is jammed Lg Tromm wm2277hb

you will have to raise the top if its top loading and disconnect the hose connected to it,if its the detergent dispenser and if it's the fabric softener one with the bleach dispenser with it there will be two hose connected to it and possibly some clips holding it in not sure all machines are different.

Posted on Aug 24, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

UE error on LG Tromm it drains but won't spin. I checked the filter and the filter is not blocked

UE= uneven ?
Remove any every heavy items such as floor towels or rugs. Is the machine draining completely or leaving lots of water behind? If not draining check the drain divirertor valve.

Nov 24, 2013 | LG WM-2277HW Front Load Washer

1 Answer

UE Error Code on LG Tromm Washer

From back or underneath, check that all three shock absorbers are attached. Take top off and check if both springs are in place and un broken

Mar 22, 2017 | LG Tromm Front Load Washer And Dryer Set

1 Answer

Hello, I have a front load LG TROMM WM2277HB and yesterday it wouldn't spin anymoreand there was a noise coming from inside like 2 metal cylinders were rubbing on each other. I called SEARS Serv

if the machine fails to spin and makes noise there are thee things to check .if it fails to drain the water check if something is stuck on the drain pump no 2 turn the drum with your hand and check if the drum is moving freely if not something is stuck between the drum and the housing if the bearings are faulty the machine spins but makes alot of noise towards the end of the cycle i hope this will help you.

Jan 21, 2013 | LG 4775er2002a Door Hinges for Wm2277hb...

1 Answer

Annoying LG Tromm wm2277hw "LE error" won't go away.

Might be "tE" error code. Thermistor error. A $6 parts and pretty common and causes the symptoms you described.

Mar 02, 2017 | LG 4775er2002a Door Hinges for Wm2277hb...

1 Answer

I have an LG Tromm front loader... I an getting a UE error code. I have tried all remedies I have found online...unplugged, adjusted load, adjusted size of load..Please help

First off all remove the top panel should be two screws in the rear remove these and slide the panel to the rear to remove it. Look for the tech sheet as this contains how to deal with the codes let me know

Sep 27, 2011 | LG Washing Machines

1 Answer

LG TROMM WM2277HB Washer will not dispense Bleach from the Bleach compartment. Thank you.

Hi from retired Englishman in SW France,
Pull out the dispenser drawer far enough to be able to just see the tray with the bleach in it, select the (final?) rinse and check that water is entering the tray. If it isn't there is a fault with the water distribution and an engineer call is required ;-0(
If this has assisted you please consider a 4 thumbs up for the rating.
Thanks and good luck!
John C

Jun 19, 2011 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

My lg gets a code of ue

UE error:
Too small of a load
Unbalance load
Appliance tilted
Non distributable items in drum.

Need a manual?

If you need further help, reach me via phone at

Jun 08, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

1 Answer

I have an lg wm1814cw front loader with a ue code

Probably the pump filter is blocked.Make sure the machine is empty...Access filter via small door at floor level. Unscrew the filter cap, and clean filter. check that there isn't a coin stopping the impeller vanes. ...When you take the cap off, any water left in machine will flow out!! Leaning the machine back can help.....Good luck...Nomess

May 16, 2010 | LG TROMM WM2688H 4.0 cu.ft. Front Loading...

2 Answers

Error Message and Tub not spinning

UE is likely an unbalanced load or load is too large. Reduce the size of the load and your issue should be resolved.

Jul 21, 2009 | LG WM-2277HW Front Load Washer

Not finding what you are looking for?
LG WM-2277HW Front Load Washer Logo

Related Topics:

152 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers


Level 3 Expert

85223 Answers


Level 3 Expert

411 Answers

Are you a LG Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides