I have a thin red line coming from the top center of my tv screen that goes half way down, then the line looks black from the center down. Is this the inverter board or the tcom

What is this thin red line that is on my screen whenever my ...

https://answers.yahoo.com/question/index?qid...

Sep 23, 2010 - There is a very thin red line going from the top of my computer screento the bottom, ... If it's a single-pixel-wide red line from top to bottom it's a failure in ....have thin red lines running down the screen??some are thicker than ...

Thin Vertical Red Line [Solved] - Acer - Displays - Tom's Hardware

www.tomshardware.com > Forum > Displays

Tom's Hardware Guide
Jul 12, 2013 - 5 posts - ‎2 authors
hi all i am having a Thin Vertical Red Line on my Acer LED moniter ... the screen is having a part fail(cable or the screen/control board it self.).

Why is there a straight vertical line going from top to bottom on ...

forums.androidcentral.com > ... > Samsung Galaxy S6 edge

Apr 15, 2015 - 7 posts - ‎4 authors
Just bought the Samsung Galaxy s6 edge yesterday. After I charged the cellphone for the first time and turned it back on there was this straight.

Sound like your Y-Sustain board has one foot in the grave. The Y upper buffer and Y lower buffer boards go when the Y Sus Goes too...

Hi,
If the line is present on all inputs, it is most likely a bad panel (screen). The screens are either not available or cost more than a new TV.
Not good news I know but at least you can save the $100 estimate fee.
Best of luck
Roety

I’m happy to help further over the phone at https://www.6ya.com/expert/eric_ab7c09ec01841771

I found the solution on mine. To restate, I just saw a thin white border around a black screen. Pressing the channel up or down buttons changed the screen, in some kind of test mode to shades of gray, and red, green, and blue. I started finding a solution when I noticed when on one of the color screens, that the volume up or down buttons brought up a new menu for color intensity. Finally, I got back to the thin white border screen and pressed the arrow keys in the top half of the remote. Finally a TV screen and I pressed the enter key! Voila!

This is a very common problem with this Panasonic set where half the right side is bad and the other half is good. This has been traced to a general plasma panel defect in the manufacturing precess. The panel lasts only about 1.5 years and they go bad. The only solution is to replace the plasma panel. The charges for the cost and labor will double the original prize of the TV set.Good luck.

Robjrpena,

Did you find a solution to your "red dot" problem? I'm having the same issue :(

Thanks John

Just on a whim I'd say you have video out put circuits in distress.

can you say WARRENTY lol

I have a thin red vertical line on the left side of my Philips LCD TV

The vertical circuit is going bad,this is the one in charge of opening the picture up and down,try taping on the side to see if the picture reacts ,if it does your set has a loose conection and the vertical IC will need to be resoldered only but if it does not react the IC will have to be replaced,if you are familiar with tv service this will give you a place to start but if you are not be safe and seek the help of a servicer,please let Us know how it goes.