My system keeps blue screening when using video feeds. I think it has something to do with Microsoft ISATAP Adapters - they won't start. Upgraded from windows XP Pro to Windows 7 pro 6 months ago, everthing was fine until about a month ago - the problem is intermitten - but today it is consistent.

It means it is not succeed, probably it is not compatible, or it needs special settings.

Greetings,

On a Windows Vista-based computer, the Microsoft ISATAP adapter appears with a yellow exclamation mark (!) next to it in Device Manager.
You can safely ignore this error message. This error message does not indicate a problem with the adapter. The adapter will continue to work correctly.
Check out this article for more information on this:
http://support.microsoft.com/kb/932520
If this is still not working,
First try to reset Winsock from command prompt, this will reset all the Network components to default:
Click on start, type CMD,'Right click and Run as Administrator'.
At the command prompt type:
netsh winsock reset catalog
In such a case, I suspect this problem to be caused by network adapter missing or corrupt. Please firstly reinstall the driver for your wireless network adapter. Then try to reinstall Microsoft ISATAP using following steps:
1.In Device Manger, right-click the item of Microsoft ISATAP and select Uninstall.
2.Still in Device Manager, click Action and select Add legacy hardware.
3.Click Next, and select Install the hardware that I manually select from a list (Advanced), click Next.
4.Select Network Adapters and click Next.
5.Select Microsoft in left panel and Microsoft ISATAP Adapter in the right panel.
6.Click Next and finish the remaining wizard.
In such a case, I suspect this problem to be caused by network adapter missing or corrupt. Please firstly reinstall the driver for your wireless network adapter. Then try to reinstall Microsoft ISATAP using following steps:
1.In Device Manger, right-click the item of Microsoft ISATAP and select Uninstall.
2.Still in Device Manager, click Action and select Add legacy hardware.
3.Click Next, and select Install the hardware that I manually select from a list (Advanced), click Next.
4.Select Network Adapters and click Next.
5.Select Microsoft in left panel and Microsoft ISATAP Adapter in the right panel.
6.Click Next and finish the remaining wizard.


Hope this helps you to solve the issue. Please do vote or provide feedback on this solution, your response will be appreciated.

Thank you and Kind Regards
Gowtam R
FIXYA Solutions Engineer.

you can try this:
Step1:

However, try the below steps to fix the issue you are experiencing:

1. Click on Start, type Device Manager in the search box.

2. In Device Manger, right-click the item of Microsoft ISATAP and select Uninstall.

3. Still in Device Manager, click Action and select Add legacy hardware.

4. Click next, and select Install the hardware that I manually select from a list (Advanced), click next.

5. Select Network Adapters and click next.

6. Select Microsoft in left panel and Microsoft ISATAP Adapter in the right panel.

7. Click next and finish the remaining wizard.

Step2:

The ISATAP is related to Internet Protocol 6.

Please check if IPv6[Internet Protocol version] is enabled on your computer to obtain an IPv6 address.

however this driver only pertains to ipv6, so your internet adapter should still function properly. if it is, you can do this:

Disable but leave ISATAP in the hardware list and go to your manufacturers Website
and check for Post SP1 Driver updates for your computers Chipset.

If you need further help, reach me via phone at https://www.6ya.com/expert/joel_63c670a84e9f6a97

i think you should go to the control panel and look for the system restore. then choose what time you want to restore your pc

ISATAP is Microsoft trying to allow IPv6 to function over an IPv4 infrastructure, however, it was released extremely prematurely, and as a result, doesn't like to work, or install. According to Microsoft, your computer should continue to function without ISATAP functioning,and the error message may be ignored. However, if you believe that this may be causing you some problems, then you may navigate to the device manager ( Start > Control Panel > Hardware and Sound > Device Manager ) from this window, see if you can find ISATAP adapter and 4TO6 adapter, right-click these, and select "Disable" NOTE: this may cause Internet Explorer and Windows Mail to run slower and have a few errors.

I hope this helps!

the yellow mark on device manager means the driver has not been installed and the driver is connected to the motherboard use your motherboard drivers CD and install them or you can download them from the net

Hi.
Let me explain you about the Microsoft ISATAP Adapters.
ISATAP (Intra-Site Automatic Tunnel Addressing Protocol) is an IPv6 transition mechanism meant to transmit IPv6packets between dual-stack nodes on top of an IPv4 network.
It is a Windows Operating System Generic Driver.
This Driver will be installed automatically.
As this is a Windows default Driver, it has no specific functions.
As you are able to view the "yellow exclamation mark", you may just un-install the Driver..
This should not change the functionality of the Computer.
1) Right-click on the "ISATAP Adapter" in the Device Manager. 2) Then, click on "Un-install". 3) This should un-install the Driver. 4) Once you have done the above steps, restart the Computer for the settings to be enabled.
Performing the above steps should resolve the issue.
Hope this helps.
Please feel free to contact for further information and assistance.

simply update drivers

Forget the system restore. The person who suggested this probably does not know what the problem is and is just maknig suggestions out of the blue.

Checkout http://support.microsoft.com/kb/932520.

If you get similar problems again got to the misrosoft web site and have a look - simple and effective.

reinstall windows vista and when it comes to a screen that says repair new os or boot you want to hit repair this will initialize vista program to install back in what has been taken out and go threw instructions and follow them till completly done