How to set up ladies roxy digital watch

I’m in synchronization mode bur cannot move the hands

how to set the time of my roxy crushing watch

How To Set Tag Aquaracer Watch

Current Roxy watches can be found here:
http://www.roxy.com/family/index.jsp?categoryId=2818071&searchSort=TRUE&pg=1&f=Taxonomy%2FROXY%2F2818071&s=D-ProductAge&fbn=Taxonomy%7CWatches&fbc=1

I don't see a "candy" model but there are some called "Jam".

If one of these is similar to your model, click on the picture of the watch, a new page will open. Under the color choices on the right side you will see a link to the Manual. The manual will have setting instructions.

Current Roxy watches are listed here:

http://www.roxy.com/family/index.jsp?categoryId=2818071&searchSort=TRUE&pg=1&f=Taxonomy%2FROXY%2F2818071&s=D-ProductAge&fbn=Taxonomy%7CWatches&fbc=1

I don't see your model but perhaps on of these is similar in design and operation. Click on the picture that most closely resembles your watch; a new screen will open. On the right side under the color choices will be a link to the Manual.

I haven't been able to locate your watch but since watches tend to be similar in operation, I suggest that you look at the instructions for my watch and try a similar settings.

Go to "http://ftp.casio.co.jp/pub/world_manual/wat/en/qw2735.pdf" and instructions for a Casio watch will appear. Go to page 4 and read instructions under "to adjust analogue time".

To set the analogue to the digital time press the mode button (lower left until "HS" appears. Then use the two buttons on the right to advance or ****** the hands.

(these instructions are for my watch but I think that your will be the same. If not, go to the Casio web site (casio.com) select support, manuals, watches, agree terms and then watch manuals archive; fill in your watch details and download full instructions.

Digital time must be set using pushbuttons on watch case sides. One of them is for MODE, another for SETTINGS.
Mode button usually must be held pushed in for a while to start to work and the digits should start to flash - only then you can start to reset your digital watch using another (settings) button.
Use small steal pin to push these buttons.
If nothing happens, you will have to consult your nearest watch repairer as in this case there is a mechanical or electronical fault.
Rating is very appreciated.

This manual might help http://www.roxy.com/graphics/uc/roxy/manuals/Roxy_manual_watch_60s.pdf

Best solution is to download the ORIGINAL INSTRUCTIONS MANUAL directly from SEIKO's main website:

http://www.seikowatches.com/support/ib/index.html