Question about Sony KP-46WT520 46" Rear Projection HDTV-Ready Television
This TV set doesn't have a digital tuner and you will need a digital converter box to receive over the air channels.
You still an antenna to receive the signal and then to connect it to your digital converter box. The programming should be easy.
The converter box should come with the user's guide on how to hook it up and program it.
Posted on Jan 21, 2018
you have a bad or maybe 2 bad stk392-560 ic's..
and or a bad pico fuse on your g board.. (there are two of them and 6 of them under your ic's
You can check with a vom meter. (resistors) Not ic's need special meter for that
Posted on Nov 05, 2008
High voltage in TV got problem and thats why TV gives 10 time blink error code.
Qualified TV tech will fix it as its bit complicated fix.
Posted on Apr 15, 2009
SOURCE: Sony kp-46wt520 blinks 9 times
you can use basic power supply diodes ecg 125s or diodes rated at 60 herts at 2.5 amp. these type of diodes are common to alot of power supply diode bridges and if you have any junk electrical boards then you could borrow them used, don't worry they will last longer than the original new ones which were not very efficient from the start.
Posted on Sep 07, 2009
That is a specialty bulb. You need to purchace from Sony, online or from a electronics shop. Dont think it even has a size designation on it.
Posted on Oct 27, 2009
Tips for a great answer:
Oct 05, 2014 | Sony KP-51WS510 51" Rear Projection...
Jan 29, 2011 | Hitachi 57F510 57" Rear Projection...
Oct 30, 2010 | Sony KP-51WS510 51" Rear Projection...
Sep 21, 2010 | Sony KP-51WS510 51" Rear Projection...
Jul 03, 2010 | Hitachi 51UWX20B 51" Rear Projection...
Oct 31, 2009 | Hitachi 46F500 46" Rear Projection...
Jul 07, 2009 | Sony KP-57WS520 57" Rear Projection...
Dec 14, 2008 | Sony KP-61HS10 61" Rear Projection...
May 25, 2008 | Sony KP-46WT500 46" Rear Projection...
194 people viewed this question
Usually answered in minutes!