Question about HP Designjet T1200 Large Format Color Inkjet 44 549 ft h Color 2400 x 1200 USB Plotter Printer

1 Answer

Error 59.2:00 in hp designjet T1200 i replaced formatter and hdd bt same issue?: pls i need the solution

Posted by on

  • salim Oct 23, 2011

    i did replace the old part and it was showing blank screen without showing anythng just light only. i open first.

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • HP Master
  • 1,121 Answers

First time are you opened this printer? or else some one attempted? This error indicating that re-used or un supported parts are installed..My suggestion replace with old parts check the error message..then do the trouble shoot. Error 06:00 replace formatter or Hard disc..replace one by one & do the diagnostic test then confirm the part condition, replace the defective part/parts ..But replace with new parts only..

Posted on Oct 22, 2011

Ad

1 Suggested Answer

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp designjet t1200 error code 80


80 ......... there is more to error code than just 80 please give full error code details for a useable solution .
eg 86:01 ( carriage motor transport error)
or 0c00340a is also a fault code
if you can supplye either full error code then I will attempt to help you resolve it thanks

Oct 07, 2013 | HP DesignJet Office Equipment & Supplies

2 Answers

Replace hp designjet t1100ps hard disk


Designjet T1100ps -Q6687A.
08:11 error. The formatter is okay but the hard disk is bad. How can I load the system software in a blank hard disk or try to clone

Apr 28, 2012 | HP Designjet T1100ps Printer

1 Answer

79:03 error code t770


my ploter problrm t610 printer ready but carriage left side stucking and error showing on display 79:04 than replaced 3 no print head but not tready ploter why? i have replaced tralling cable .timing belt; formatter card , encoder strip , carriage block with carriage pcb but same problem .pls shuotout my issu.

Feb 11, 2012 | HP DESIGNJET T770 Printer

1 Answer

ERROR 08:11 HP DesignJet Z2100 InkJet Photo Printer


08:11 error = no communication between formatter and front panel

Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.
If the error persists, you are going to need a tech to do the following:-

Check that the Front Panel interface cable is not damaged and is correctly connected between the Main PCA and the Front Panel.Check that the connections between the Formatter and the Main PCA are not damaged and are correctly connected.
If the System Error continues, replace the Formatter
If the System Error continues, replace the Main PCA
If the System Error continues, replace the Front Panel

Nov 07, 2011 | HP DesignJet Z2100 InkJet Photo Printer

1 Answer

I am HP partner tech and have a problem which HP are not interested in. Fitted a new electronics module and now get 05:10 error which is bad/missing formatter, printer has never had a formatter. I press...


System Error: 05:10 Error (Only applicable to HP DesignJet 500 Series)

Problem Description:
HP-GL/2 Accessory Card failure.

Corrective Action:
Power OFF the Printer and replace the HP-GL/2 Accessory Card

Remove the Formatter

guilopmar_53.jpg


guilopmar_55.jpg

guilopmar_56.jpg

Aug 08, 2011 | HP DESIGNJET 500 InkJet Plotter Printer

1 Answer

08:11 error in hp designjet t1100


System Error: 08:YZ
Problem Description: Problem with the Front Panel.
Corrective Action: Try the following:
  • Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer.
  • Check that the Front Panel interface cable is not damaged and is correctly connected between the Main PCA and the Front Panel.
  • Check that the memory module in the Formatter is installed correctly.
  • Check that the connections between the Formatter, the Formatter and the Formatter are not damaged and are correctly connected.
  • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version.
  • If the System Error continues, replace the Main PCA
  • If the System Error continues, replace the Formatter
  • If the System Error continues, replace the Front Panel

Jul 27, 2011 | HP Designjet T1100ps Printer

1 Answer

Printing to HP Designjet T1200 from Linux, RHEL 5.3 Server. Error 61:01 wrong file format. The printer cannot process the job, how may I resolve this?


This can happen due to the firmware on the plotter, even if it happens only with some postscript files.

http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&taskId=125&prodSeriesId=3980523&prodTypeId=18972&objectID=c02189041

Apr 20, 2011 | HP Designjet T1200 Large Format Color...

2 Answers

My hp t770 have this error 59.2:00 after repalcing formatter board plz help me


A 59.2:00 error says that a reused part has been installed.
If you paid for a NEW formatter get your money back and shop somewhere else.
If you paid for a repaired/reconditioned part, it won't work.
You need a NEW formatter.

Mar 18, 2011 | HP DESIGNJET T770 Printer

1 Answer

Hp designjet Z3100 photo plotter 79.04 error


It Seems It Could Be a issue with Formatter
but still We Can Do A Emergency Firmware Upgrade ,Mail Me For Detailed Steps

Apr 06, 2009 | HP Designjet Z3100 InkJet Photo Printer

Not finding what you are looking for?
HP Designjet T1200 Large Format  Color Inkjet  44  549 ft h Color  2400 x 1200  USB   Plotter Printer Logo

2,077 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Cindy Wells

Level 3 Expert

6073 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...