How to reset treadmill T630 - Exercise & Fitness

If you wish to get some details; check the site linked here. Pull up older posts.
http://electro-medical.blogspot.com/

motor burning out

Go to the manufacturers forum. It may be the wireless device of the printer.

The following will reset the maintenance count after you install the maintenance kit, you can not reset the printer total page count. Press and hold down the [Select] and [Return] keys while powering on the printer, hold these buttons until the display reads "Performing Self Test." If the display readds "80 Schedules Maintenance", press the [Go] to continue past this message and access the Configuration Menu. Press the menu button until the display reads "Reset Maint Cnt" on the second line of the display and press the [Select] button. The top line of the display should now read "Reset Maint Cnt" and the second line will read "Reset" and press the [Select] button. This will reset the counter. To exit out of the "Configuration Mode" cycle the power.

you can get unlock codes here http://www.unlocking4u.com/sony-ericsson-t630/rs6wp9/

Remove the back rear door. Then remove the 2 screws holding the redrive in place. After doing so you can see a metal bar running left to right that has a small white or opaque roller on each side. just to the outside of each of those rollers you will see small black flag sensors. Chances are, one of them has fallen out or gotten stuck in the open position, or pinned down. These are page exit sensors. Correct there position and reset the printer.

Press Select and Return buttons at the same time while printer is powering on. Once you have the Config menu, choose Factory Defaults, then hit Select.

hi just install the sony ericsson pc suite.
http://www.sonyericsson.com/cws/support/phones/detailed/whatissonyericssonpcsuite/t630

you will eather need a wire connection or bluetooth.

Hi,

You need to go into settings and master reset.