Did you check the service manual troubleshooting guide yet. You can try disconnecting the power to the inverter board and see if it will stay on and have sound. Basic LCD monitor and TV troubleshooting guide: Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.
Service manuals:
http://elektrotanya.com/?q=showresult&what=Sharp%20LC37SB24U&kategoria=&kat2=all
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
http://www.fixya.com/support/r7406380-tv_training_manuals
Failed TV and Monitors pictures: http://s807.photobucket.com/albums/yy352/budm/
Or www.digikey.com just make sure to use caps with low ESR, 105c, high ripple current, long life rating such as PANASONIC FM or FC series.
Yup already disconnected it and the tv will still give me a blinking light and not come on
I download the service manual but it does not have any diagram or any troubleshooting guide for it.
It isdetecting false some where in the set, without the service manual it will be real hard to figure out where the fault is.
Every GOOD tech knows services manuals are only good for one thing...wiping. That was a dead give away.
×
757 views
Usually answered in minutes!
Yup already disconnected it and the tv will still give me a blinking light and not come on
×