Sony HDTV flat - no picture with HDMI cable and Verizon FIOS box

Make sure that the dvr is not outputting a HD signal to your set - if it is, your set will not work unless you change the signal to 480 from the HD setting.

well basicly you have to make sure all the right cords are hooked up right if not do so if it still doesnt work GET AN NEW ONE!

The best code I could find was "007"

"210" kind of works, but can't compete with Mr. Bond.

After programming "007", if there are any features of you FiOS remote that do not work on the HK AVR 354 remote, simply follow the HK AVR 354 manual instructions to "learn" additional commands. See the last paragraph on page 31 through letter "e" on page 32.

Cheers,
Jeremiah Pattison

Keywords: Harman Kardon AVR 354 remote code to control FiOS DVR PVR STB cable box QIP 6416

If you can first connect the Fios box via component and that will rectify the issue and still allow HD. HDMI is funny, if there is anykind of communication issues between the TV or the Fios box you see what happens. You might also call Samsung to see if there is ANY firmware/software updated for your TV specifically to fix such an issue with the Fios/Mortorola connection. If there isn't then the issue is the cable box since the TV works ok on HDMI with other devices.

Try 0000000000

the only thing that i can think of is that the cables and connections are bad but if that is not the case it may be the internal components of the tv. my guess is that the tv was dropped or jumbled around while transported and what happened was internal components were broken or just mixed up so go to the retailer and get a refund or a new tv. hope this helps

are you using an HDMI cable? verizon has a thing with hdmi connections to samsung for sure, cause i have the prob my self, and i'm sure the tech said sony too. if you have a usb port on it, you can update the firmware and that may help

I called Verizon and exchanged my STB from a QIP 6416 to a QIP 7216 and it solved the HDMI audio problem. This looks like the fix.

Called Verizon automated help desk. They rebooted DVR remotely and solved the problem.

I got the solution. Contact Customer Service, ask for LEVEL II Tech, and ask them for the old firmware. It will take a lot of pressuring, but they will send it to you and then it will work fine!