Bosch dryer
I had this problem for an axxis condensation WTL5410.
When starting dryer ligghts on front would cycle through normally as if dryer were running but dryer would not turn or get hot.
The problem was the door switch. Push in the door switch activator on the bottom right of the dryer. Push it hard a few times and try the dyer again.
doesnt sound like a great solution - but after 150$ and 2 service calls - it was what fixed it for us.
Hi Ken, welcome to FixYa.
I just need to clarify if you are talking about the main door to add items, or the 4" round access door at the bottom to access the pump ?
Let me know and i'll help in any manner I can. Thank you.
Regards,
Macmarkus :)
Ken,
Sorry about my initial post, I see now it likely seemed "duh" since it is a dryer. That's because I didn't pay attention (Mondays...ugh lol) to see it's a dryer. Anyway, if you still need assistance please reply and confirm it is indeed the "WTMC" (Nexxt) series Bosch and I should be able to help from there.
Regards,
Macmarkus :)
×