Read the following:
http://blog.coppelltvrepair.com/2011/02/hp-pl4260n-suddenly-lost-picture-how-to.html
Different TV, but most likely same problem and, in fact, quite possibly literally the same boards, so maybe practically the same TV.
Can't be sure since you haven't posted the model of your Viore.
If you have specific questions, please always include the model number in the question...the model is on a sticker at the back of the TV, right after or below the words "MODEL:" :-)
SOURCE: Vizio P42HDe Plasma TV - Audio, but no picture
check the backlight inverter and the Y-sus board the one to your left. if those are fine check the bottom right buffer board
SOURCE: SCREEN BLANK....
I have over 10 years experience in electronic tech support. Currently I work for Viore customer service. Our customer service phone number is 216-454-0868.
I
know this isn't what you want to hear, but the problem you've described
can't be fixed with troubleshooting. Your TV will have to be repaired.
There is a part that has developed a defect and needs to be replaced.
The repair will cost a minimum $250 to $300 with parts and labor. If you're interested in going forward with repair, take the TV to a repair shop in your area to have the problem diagnosed. The tech will give you a copy of the work order showing the part(s) needed to complete the repair. Then you'll call the above number and ask to speak with Raphael at ext. 3115. The work order will be forwarded to the corporate office and they will contact you with the price of the replacement parts. You will be charged for the parts directly to avoid any markup by the repair shop. The part will be shipped directly to whatever repair shop you choose.
I hope I've provided you useful assistance and that this information
allows you to make an informed decision as to how to proceed from here.
I hope I've earned a positive rating from you today.
Please let me know if I can be of further assistance.
SOURCE: LG 50inch Plasma received loud sound then went black
I had the same problem with my LG 50 inch TV that I bought from Best Buy in Nov 2006. Fortunately I had the service plan. They had to replace the power supply board as 9 capacitors popped, so the TV would turn on them pop and go black and turn itself off. The TV has been a pain. I have the built in DVR and that has failed twice. I have had 3 repairs through best buy. One more time they owe me a new TV when they come out.
SOURCE: my viore 42 in plasma is not projecting image. I
The video IC module seems to be giving problems. Open the back cover and take a peep inside. Look for the module just short of the screen. replace it if need be.
SOURCE: My 42 in. 42HP66 Toshiba Plasma TV popped and screen went blank
One of your y driver almost go bad. For your future problem please visit my site athttp://billy-tech.blogspot.com/
348 views
Usually answered in minutes!
×