Test all leads that attach to your hard drive including electrical extensions,IDE,SATA the leads from your ((motherboard to your hard drive)) make sure they have a secure connections and are not faulty or just replace them they might be faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty even the electical extensions even something as small as an electrical fan and its lead can cause you problems or just replace them they could be faulty a computer needs all electrical power and data to continue through every working device and to have an end so any faulty leads will end up with a computer error make sure your graphics card is securely seated with no dust built up or in the socket if you remove your graphics check the socket to make sure its dust free restart your computer then reinstall it this should activate found new hardware wizard hope this helps you
154 views
Usually answered in minutes!
what sort of problems are you having with your monitor
resistance location no are 3644 and 3626 in philips 107T
Hi, why have you sent me 12 requests for equipment which I do NOT support, please? I was dealing only with washing machines but I am going to cease completely now mainly because of being flooded with these rediculous 'direct questions'. Sorry. Good luck. John C
The circuit reference numbers won't help much unless a factory tech happens to see your request. You need to describe the problem you are having and why the resistance values are not visible (burned?). There are methods of achieving a close estimate of the value of a burned component and the likelihood of anyone outside the factory having access to schematics is extremely remote. Also, you might try to determine in which circuit these resistors are located since that would also give us an idea of the value and power dissipation requirements.
×