Sentry 2260 do i start left to right or right to left

Sentry made safes with 3- and 4-number combinations. The pattern is related to the left/right/left but you have to spin the dial more than 360 degrees on some numbers in the combination. The pattern to unlock the safe for the 3- number combination models is: turn the knob to the left so that 0 passes the pointer three times before you stop at the first number. Turn the knob to the right and stop the second time that the pointer aligns with the second number. Then turn the knob to the left again and stop the first time the third number lines up with the pointer.

For the 4-number combination safes, you start turning the knob so that 0 passes the pointer four times before you stop at the first number. Turn the knob to the right and stop the third time the second number aligns with the pointer. Turn the knob to the left again and stop the second time the third number aligns with the pointer. Finally turn the knob to the right and stop the first time the final number aligns with the pointer.

Sentry has the manuals for many of their safes on their support site: https://www.sentrysafe.com/support/product-manuals . The direct link to the manual for the 1310 is currently https://cdn.masterlock.com/sentrysafe/resources/pdf/manuals/Sentry-SLS-Old-Models-Instructions.pdf .

I hope this helps.

Cindy Wells

Remove the feet and drill holes for grade 8 bolts.

A1 Locksmith Google

Contact the company directly as they have the codes

I can’t open my h060 sentry safe the joy is inside and can’t remember combination

Your only solution if you can not find your owners manual it is posted in is to order keys and combination from the serial number on the safe or drill out the locks

left right left right 4,3,2,1 start from zero, count the first time the number passing

Safe and vault techs would advise you
1. Press the Program key.
2. Press it a second time.
3. Enter your 5-digit User Code. The green LED remains ON.
4. Enter the 5-digit Password of your choice (any combination
except 00000.) After 5 digits are entered, the green LED
turns OFF.
(To enter a new Password, repeat these steps. To erase the
Password, press Program twice, enter your User Code and then
enter 00000.)

A good locksmith should be able to help you

Locksmith instructions for sentry safes
on how to dial open sentry fire safes.
NOTE: If your safe doesn't have a key, skip Step 3.
Turn the dial to zero.
Insert your sentry safe key and turn it until the plunger pops out.
Turn the dial to the left (counterclockwise) three times to the first number of the combination (pass the first number of your combination two times, stopping on it the third time).
Turn the dial to the right (clockwise) two times to the second number of the combination (pass your second number once, stopping on it the second time).
Turn the dial to the left to the last number (stop the first time on your last number).
Pull the handle down; cracking sentry safe open.