Hello, I have LG WD 80130 wahshing machine. It doesn't heat water. I checked the heating element and the cables and they are OK. Also I checked the thermostat with multimeter when the water is hot (80C) the resistance is about 15 kOhm and when the water temp is regular (20C) the resistance is about 55 kOhm. Does the thermostat works properly? What could be the problem? Thank you, Michael
Bad cable or slide contacts or even a connector block is disconnect from a connector , it can happen when the If the motion result of the drum was too large, and can happen when a suspension eye was broken on the drum to know every brand has its own remarkable safety tricks on marketing technical arts. ( or its only a circuit thermal circuit breaker that has a problem with a slide cable connector on it or the breaker itself is damaged. Track the circuit from the program clock you can sometimes find a remarkable defect in modern washing machines.
LG WD 80130F Manuals
SOURCE: LG WM2688.. water heater not working
I would also check that the unit is grounded. A non grounded unit can cause problems with the electronics
Please rate this solution
SOURCE: LG washing machine error codes
Hello,
I have today the same error code on model WD-11155FB. This code means that the speed of the electrical motor can no longer be controlled. The velocity sensor placed just behind the motor is probably damaged but it can be also the electronic board where is connected this sensor, or the wiring between these two items.
SOURCE: Bad smell in our washing machine LG Front Loader WD-8074
I had the same problem. It's a design flaw with all HE's I have learned, they are too efficient. I visited my local Sears store and purchased WasherFresh. I initially tried Affresh made by Whirlpool, did not help at all. WasherFresh I initially had to use 3 tables to get rid of the buildup and now I use it once a month and now our towels do not smell moldy. Hope this helps.
SOURCE: LG WM2355C water leaking under machine after washing finished.
HI, you will want to Inspect the water supply connections. this is a good spot to check first. there may be a loose connection here, causing the leakage. Next, Inspect the drain hose. Check to make sure that it is tightly connected to the drain pump. replace if needed. Last. Inspect outer tub/basket for cracks or corrosion.
You will find the issue in one or all of the above stated check points.
SOURCE: lg 801 3f washing machine. 15 seconds after selecting any cycle a
I had the same problem. Redistributing the clothes inside the machine seems to do the trick. Even though the clothes seemed evenly distributed and I had far less than maximum capacity in the machine- it seemed to think that something was out of sync- simply moving the clothes around did the trick!
For this error code you need to check both the water heater or
element and thermistor, basically the washing machine is reporting a
fault on the heating circuit with this fault code but it is not capable
of identifying exactly where the fault actually lies.
On non-display panel models this fault code is denoted by the lights for 95, 60, 40 and cold being lit or flashing.
487 views
Usually answered in minutes!
×