Filling up won't stop

There is a clear plastic hose that runs from the load selection switch to the side of the washer drum. This hose connects the fill sensor to the load switch. without it being in good condition and connected properly the washer won,t get a signal that it's full.

May 09, 2013 • Kenmore Washing Machines

1helpful

1answer

My samsung top loader washing machine sw65v9w won't stop filling with water

If the water stops when you stop the cycle, then the pressure sensor is at fault. If you need to turn the water supply off to stop it, then the water inlet valve is at fault.

Nov 04, 2012 • Washing Machines

0helpful

1answer

Kenmore washer model #111092581200 won't stop filling and won't agitate

Please recheck that model number. It is coming up as a microwave.

Oct 31, 2012 • Washing Machines

0helpful

1answer

Washing machine won't fill. i filled it by hand with water, it won't agitate either, only spins.

The inlet solenoid is probably bad. And it won't agitate unless it fills and stops filling automatically.

May 17, 2012 • Whirlpool Washing Machines

1helpful

1answer

Washing machine won't agitate to wash, it fills, then stops. If you move to the rinse and spin, then it continues on.

this problem could be your lid switch

Mar 03, 2012 • Maytag Centennial 3.2 cu. ft. SuperSize...

2helpful

1answer

Kenmore washer 90 series continue to fill w/water. Load size won't stop the fill... had to shut off water source. won't get to agitate phase... just want to stay at fill stage... can drain, spin,...

Sounds like the fill switch needs to be replaced. A good way to test it is to set your machine on low fill and see if it fills past 3/4. If it does, it's the fill switch.

Aug 20, 2011 • Washing Machines

2helpful

1answer

Washing machine starts filling then wont go any

there are a lot of questions of a simular nature check the diaphram switch this controls how much water is taken in and wont progress until the switch says so what you dont say is if the machine keeps filling or stops filling and wont progress

Jan 16, 2010 • Whirlpool Calypso GVW9959K Top Load Washer

Question 2

Anonymous

Master 1,263 Answers
Posted on Sep 28, 2008

Anonymous

Master

Joined: Aug 27, 2008

Answers

1263

Questions

3

Helped

683136

Points

4577

The reson why it won't stop filling up , is that the level float is malfuntioning. this could be because it is stuck in the down position or the micro switch itself is bad this should be looked at and if it's not the float itself then replace the microswitch... please rate this.......thanks

Answer 2

john gagnon

Master 943 Answers
Posted on Sep 28, 2008

john gagnon

Master

Joined: Sep 11, 2008

Answers

943

Questions

1

Helped

324246

Points

2163

Hi. thanks for the question .if the water would only shut off ,by turning off the water .replace the water valve thanks the appliance doc

Related Topics:

Trustworthy Expert Solutions

Filling up won't stop

2 Answers

Anonymous

john gagnon

Add Your Answer

Attachments: Added items

Related Questions:

My washing machine won't fill on cold wash??

I have a GW711 top load washing machine and the water won’t stop when it is filling

Washing machine hoover 1210 would not stop filling the water

Kenmore series 80 model 110 wont stop filling!

My samsung top loader washing machine sw65v9w won't stop filling with water

Kenmore washer model #111092581200 won't stop filling and won't agitate

Washing machine won't fill. i filled it by hand with water, it won't agitate either, only spins.

Washing machine won't agitate to wash, it fills, then stops. If you move to the rinse and spin, then it continues on.

Kenmore washer 90 series continue to fill w/water. Load size won't stop the fill... had to shut off water source. won't get to agitate phase... just want to stay at fill stage... can drain, spin,...

Washing machine starts filling then wont go any

Not finding what you are looking for?

Ultimate Care II LSQ9549L Top Load Washer

My washing machine won't fill on cold wash??

Ask a Question

Top Whirlpool Washing Machines Experts

Mike Cairns

ZJ Limited

Brad Brown

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides

Related Topics:

Trustworthy Expert Solutions

Filling up won't stop

2 Answers

Anonymous

john gagnon

Add Your Answer

Attachments: Added items

Related Questions:

My washing machine won't fill on cold wash??

I have a GW711 top load washing machine and the water won’t stop when it is filling

Washing machine hoover 1210 would not stop filling the water

Kenmore series 80 model 110 wont stop filling!

My samsung top loader washing machine sw65v9w won't stop filling with water

Kenmore washer model #111092581200 won't stop filling and won't agitate

Washing machine won't fill. i filled it by hand with water, it won't agitate either, only spins.

Washing machine won't agitate to wash, it fills, then stops. If you move to the rinse and spin, then it continues on.

Kenmore washer 90 series continue to fill w/water. Load size won't stop the fill... had to shut off water source. won't get to agitate phase... just want to stay at fill stage... can drain, spin,...

Washing machine starts filling then wont go any

Not finding what you are looking for?

Ultimate Care II LSQ9549L Top Load Washer

My washing machine won't fill on cold wash??

Related Topics

Ask a Question

Popular Questions

Whirlpool Duet Sport Washer will not drain - F-21 error

F 11 error code on Whirlpool Duet - Serial Communication Error ?

Whirlpool cabrio error code f51 what does it mean?

Whirlpool Duet Washer-error code "sud"

Whirlpool duet washer-error F06 and E02

Top Whirlpool Washing Machines Experts

Mike Cairns

ZJ Limited

Brad Brown

Are you a Whirlpool Washing Machine Expert? Answer questions, earn points and help others

Manuals & User Guides