Durabrand Tv need to program universal remote

I have quantum fx rem 115 jumbo universal remote, I lost the manual. How can we program our durabrand tv

You can program a Comcast remote to work with the TV. Press the "TV" button on the Comcast remote. Then, hold down the "Setup" button until the red light blinks 3 times. Enter a 5 digit code:
These are the Durabrand codes: 10171 10463 10180 10178 11034
The 10171 code worked for my Durabrand DWT1905. Then use the TV/VCR button located beneath the "7" to switch inputs.

try www.xdiv.com/remotes

get a G.E universal remote with code search. do a code search for tv push chanel up untill the tv changes and push mute. the remote cost about $8.00

here are the codes for duraband, 1004, 1153, 1167, 1207 one of these will work if not or you need more help let me know!

try http://www.remotecentral.com/

have your problem fixed get a / one for all / remote controe it has the tv in that you have in the list cost little to nothing to get it go to wall mart please reply thanks p.s. rca dont have codes for that tv all for one does

We broke our remote for the Durabrand 13 inch tv, bought a RCA universal remote and that did not work. Just bought the radio shack 3 in 1 remote for $7.99 and it had the codes for the Durabrand tv and it worked fine. Hope this helps.

I bought the "3 in 1 easy to use" universal remote from Radio Shack for $5.99 and used the Durabrand Codes in the insert. It worked perfectly.

I am not sure about Direct TV but dish network does not allow the hookup to go through their box...it must go through the TV only. Speaking with Duraband at 1-800-256-2487 confirms you have to have a Duraband remote and universals won't program to it. Ask for parts dept. and order a new remote. Sorry - not good news for me either!!!