Error code E64?
Heating element wire malfunction.
On this model, as I'm sure you have noticed, the trap tends to drop quit a bit of the lint, in which the lint trap isn't to effective and the seal of the duct its attached to isn't "sealed". From my personal experience when I ran into this issue I just simply had to take the back off the machine, clean out all the lint (i even found 2 dollars in silver in there) and checked all the connections down in the base. I even went as far as removing the top and checking the connections on the control board, but considering I removed a 3 inch layer of lint from inside I honestly think that wasn't an issue. From observation I would also be sure to try and remove the lint from around rollers for the drum just for good maintenance. If all else fails get a multi meter and between these two sites you should be on your way to repairs if you really are trying to save money.
http://www.repairclinic.com/RepairHelp/How-To-Fix-A-Dryer/8-2-831456-/Frigidaire-Dryer-doesn-t-heat-LAQE7000LW0
http://www.searspartsdirect.com/partsdirect/part-model/Frigidaire-Parts/Dryer-Parts/Model-LAQE7000LW0/1428/0151200?pathTaken=&prst=0&shdMod=LAQE7000LW0
these are repair information that I found helpful. I am not associated with either company, just trying to educate.
The E64 error code is telling you that there is a problem with the heater You will need to take the dryer apart and check the heater circuit.
SOURCE: frigidaire affinity electric dryer says error E 64, what does that mean?
Heater has an open circuit and need to be replaced. Here is the part you need.
Hello friend, that's a great question!
From my understanding your Frigidaire Affinity dryer is displaying an error code of "E64". An "E64" error code stands for the heater circuit is open. This could be a possible problem with your heater, wiring harness, or even a miscommunication within your dryer. In order to clear out any miscommunication you can perform a reset on your dryer and to do that you need to unplug the power cord for at least ten minutes. If this does not help to resolve your issue I would recommend having a professional technician out diagnose and repair your dryer to help avoid any future issues or unnecessary part purchases. Hopefully this information is helpful. -Matt
22,596 views
Usually answered in minutes!
Error code E64 comes up what does it mean
my dryer will not stay for more than two minutes a code e64 comes on
×