Question about Bosch Nexxt 100 Series WFMC1001UC Front Load Washer

1 Answer

Bosch Nexxt 100 series front load washer will not spin. The machine will go through the entire wash cycle from wash-rinse-spin-finish but does not spin. I tried a separate spin cycle and nothing happens. I removed the back panel and the belt is not broken. I can spin the drum by hand. Also, the beep sound when a wash cycle is done is not working.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Bosch Master
  • 3,462 Answers

Just going on these symptoms, you may need a new control/timer.
Inside the control /timer are electrical contacts, and when your machine gets to that part of the cycle, the contacts are not closing to allow the cycle to complete.
If you have circuit board, you will perhaps need a new one of those.
If you do not, probably a control/timer assembly.
If you type "SeasPartsDIrect" into you computer's search engine, and then type your complete model number into the blank when you are asked for it, you may look at the schematic and see whether you have a control / timer or a circuit board.
God bless your efforts.

Posted on Oct 08, 2017

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ginko

Ginko

  • 19396 Answers

SOURCE: door won't open Bosch Nexxt 100 Series WFMC1001UC Front Load Washer

The door sensor/ lock is not working well

Posted on Mar 21, 2008

Anonymous

SOURCE: Bosch Nexxt 100 Series washer

Bosch Nexxt series 100 place clothes in machine start add detergent as always machine begins to add water for about 30 seconds then stops , sometimes stops and sounds like it is trying to drain sometimes just stops and won't unlock door even if you turn machine off. Sometimes if you switch from hot to cold washer will work just fine for a couple of days then back to just stopping.

Posted on Sep 23, 2008

douglas smith

  • 1462 Answers

SOURCE: my bosch nexxt 500 series washer won't spin

possibly the motor brushes.
take back panel off. disconnect motor. remove bolts holding motor in and take out motor. check condition of brushes

Posted on Oct 18, 2008

barkencoa

Barry Coates

  • 3463 Answers

SOURCE: Bosch Nexxt 100 series front load washer

You first of all need to check the pump filter.
This should be located at the botom front right of washer.
Look for a drop down flap or cover, once located, unscrew filter anti-clockwise to remove and clean.

The pump itself is directly behind the filter housing, check there is nothing stuck in the housing.
This should solve the prob.
Please leave feedback for my solution.
Thankyou.

Posted on Jan 11, 2010

Testimonial: "I submitted a question and got a very quick response. The response was useful and enabled me to make the repair myself. Thank-you!"

barkencoa

Barry Coates

  • 3463 Answers

SOURCE: bosch 100 series will not drain

You need to check and clean the pump filter if you have not already done so.
This is located at the bottom front right of washer.
Unscrew anti-clockwise to remove and clean.

Posted on Mar 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why will my washer not spin in the rinse cycle


Because you have e too much soap and froth in the machine. The level sensor thinks is is still not full of water make sure that you don't over soap the machine and clearly ensure a filter is not blocked in the pump trap down the borrow of the front panel under the little door opening. Open this up and clear all obstacles . Good luck.

Feb 07, 2015 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

I have a Bosch Nexxt 700 Series Washing Machine. We have been emptying our washer by shop vac for a couple months now. Nothing in the pump. Once through the wash cycle it will try to drain and then flash...


Is the pump pumping? Have you cleaned all the drain lines including the discharge hose? You may have nothing in the pump but it could be blocked somewhere else.

Apr 24, 2014 | Bosch Nexxt 700 Series WFMC6401UC Front...

1 Answer

How to replace a drain motor on a bosch nexxt 100 series washer


Maybe you just need to change the motor brushes. YouTube has some great videos. Spares here on Fixya. Did you check out your filter?

Click if helped.

Mar 18, 2013 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

My bosch 100 nexxt will not spin or complete a full cycle


does it spin and no pump, or pump and no spin or neither does it come to end of normal wash and stop before spinning.

Dec 21, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

My washer will not complete a full cycle.. when on rinse does not finish beeps as though it done but is still on rinse..also fabric softner does not drain into machine. machine will spin if I manually set...


my washer does not finish a full cycle ;but is still on rinse and its a bosch and i was wondering
were is the fuses kept in the machine,

sandra read

sandrarread@yahoo .co uk

Jan 22, 2011 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch Nexxt 100 series washer stops at 1st spin cycle


take a look at your manual that came with your machine go to problems usually at the back and see what that says,or go to the bosch website and type in your model number its on the inside of the door.i would suspect a program fault.adrian,,,,,

Jun 28, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Bosch Nexxt 100 series front load washer


You first of all need to check the pump filter.
This should be located at the botom front right of washer.
Look for a drop down flap or cover, once located, unscrew filter anti-clockwise to remove and clean.

The pump itself is directly behind the filter housing, check there is nothing stuck in the housing.
This should solve the prob.
Please leave feedback for my solution.
Thankyou.

Jan 11, 2010 | Bosch Nexxt 100 Series WFMC1001UC Front...

1 Answer

Beeping on spin cycle


It is most likely out of balance, could be for many reasons.
1 could be too many heavy items such as jeans, towels, etc in one load.
2 could be the machine or floor is unlevel.
3 Could be a balance sensor needs replacing.

Mar 09, 2008 | Bosch Nexxt 100 Series WFMC1001UC Front...

3 Answers

Bosch Nexxt 100 Series washer


Look into your manual, clean outlet filter & refit. Machine will not spin out if filter is clogged.

Dec 21, 2007 | Washing Machines

Not finding what you are looking for?
Bosch Nexxt 100 Series WFMC1001UC Front Load Washer Logo

Related Topics:

979 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bosch Washing Machines Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

jimorris77

Level 3 Expert

411 Answers

Dw Wooten
Dw Wooten

Level 2 Expert

227 Answers

Are you a Bosch Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...