Question about LG 50PX4DR 50 in. Plasma TV

Open Question

ZSUS confusion Can this Zsus board blow if a tv is accidently dropped or if the TV is turned on but the screen is smashed? Husband accident dropped TV, insurance company says TV has this falut on it and say this fault can only have happened before the accident as it needs a screen to be on for it to blow. Is this true. Worked totally find before. Confused and annoyed!! Help!!!

Posted by on

  • Chi Chu Dec 24, 2011

    No,the Zsus board will not have any damages or the functions of it and to it circuitries .If the tv still work have audio and pictures when it was dropped.Only the tv plasma screen it damages and destroy.Any way the insurance company must pay if u file a claim.That what insurance are for

×

Ad

6 Suggested Answers

Anonymous

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

ken black

  • 179 Answers

SOURCE: Toshiba 42Hp66 No picture only sound

to test the zsus board check for a low resistance on the fuse to ground. sadly if the zsus is bad, the ysus and one or both of the driver boards is probably also bad. best to change all at once as a defective one can tacke out the others.

Posted on Dec 31, 2008

Ad

John Bolton

  • 87 Answers

SOURCE: LG 50PX1D, YSUS and ZSUS board replacement

first thing that you can do is use the Google serch by just typing in lg 50px1d and see if you get any thing close to what you need.

Posted on Jan 06, 2009

Anonymous

  • 50 Answers

SOURCE: Zenith zsus pop

Hello to all! Some of the time with LG type Y & Z sustain boards you must replace both the boards in order to completely the repair or but not always. Please feel free to message or call me if you need more help with your Zenith plasma TV. 1-503-432-9904 / pleasefixitdave@yahoo.com Ask for Dave! If you are reading this post and you need help with a plasma or LCD type TV give me a call!

Posted on Feb 04, 2009

Anonymous

  • 1 Answer

SOURCE: LG 42PC3D ZSUS Board Location

the z sus board is the board thats on the right next to the right speaker looking at it from the back, and you can get it at ebay cheap.

Posted on Jan 11, 2010

Anonymous

  • 1 Answer

SOURCE: GE 6 QT crock pot inside dish

I accidently smashed the bowl insert of my 6 quart crockpot Where can I purchase a replacement one?

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

TV with no picture


Open tv and look at power supply board. ...look for bulged caps...also controller boards could be blown if caps e blown

May 19, 2014 | LG 50PX5D 50 in. Plasma HDTV

1 Answer

Green light flashes then screen goes off


Disconnect ZSUS board (the one to the right of the power board from the back) from the Y board (the one to the left of the TV from the back) and try to power on again, see if it stays on.

If yes that's the bad board.

If not disconnect the Y board from power and try again.

TV may still shut itself off, but the timing should be different, even if slightly different.

use www.coppelltvrepair.com/newservice to send either or both boards for repair.

As of today (oct 2012) prices are fixed at $100 for ZSUS and $120 for YSUS.

Oct 07, 2012 | Zenith Z50PX2D 50 in. Plasma HDTV

1 Answer

I have a 50in vizio hdtv20a and the amber light is on in the corner but it will not power up


The number one reason for this is failed YSUS board EAX37106201 . There are two ICs on it and one of them shorts, preventing the TV to power on.

The second most common reason is failed power board EAY32929001. There are several different things that can happen on it, but the first I'd look for if I were you is visually swollen electrolytic capacitors on the board. Look that up on Google and you'll see plenty of pictures of what to expect.

The third reason would be a bad ZSUS board EAX34042701 / EBR37284601 . Same as with the YSUS, only this is less common and, this one can actually be tested really easy by disconnecting the ZSUS from power and trying to power on the TV again. If it does come on (even with blank screen) then it's the ZSUS that is bad.

You can and should do the same with the YSUS, but it will only work if the ZSUS gets power directly from the power board and NOT through the YSUS board. I am not sure how they were on P50HDTV20A in particular, but in those models usually the ZSUS gets power through the YSUS and thus if you disconnect YSUS from power you automatically disconnect ZSUS as well, which is not good for tests as the power board needs load on the Vs line.

Well...hope that helped...don't forget to rate it if it did!

For more check out http://blog.coppelltvrepair.com or email us directly.

Sep 18, 2011 | Televison & Video

2 Answers

Some troubleshooting help please.


The part that caused the fuse to blow is the hybrid that is mounted underneath the heatsink on the YSUS and ZSUS boards. The part used on these boards might be YPPD-J017C or YPPD-J018C, in about 90% of the time, replacing these hybrids fixes the plasmas with no video but good audio. Since VS and GND is shorted, that means that the hybrid has shorted internally. Most service techs would rather replace the entire YSUS or ZSUS boards since the hybrids are very difficult to remove.
Let me know if you require further assistance.

Apr 09, 2010 | HP PL4260N 42 in. Plasma HDTV

1 Answer

How to change lamp in toshiba 42hp66?


This TV is a plasma according to the model number you've posted. It does not use a lamp.
If the plasma does not show any picture, there might be a defective Ysus, Zsus or power suppy board.
There is a high failure rate on the Ysus and Zsus boards.
Search for a Ysus and Zsus board on google and you should find them.
Good Luck.

Jul 02, 2009 | Televison & Video

5 Answers

Lg plasma 42PC3D no picture with sound


I know you already replaced the board, this is for future searchers. If you heard a popping sound, then the picture went out, there is a 32 pin Sanyo module that goes bad on the board. That's probably what caused the fuse to blow. Replace the module, then replace the fuse. The module is less than half the cost of a used board. Since this was a popular model TV, there are lots of replacement boards on the used market.

Mar 15, 2008 | LG 42PC3D 42 in. Plasma Television

1 Answer

Lg 50px4d


LG 42" Plasma TV 42PX3DCV Parts - YSUS ZSUS CTRL Part Number (set): 6871VSNB03E Part Numbers (individual): 6871QYH036D, 6871QZH041B, 6871QCH053G Part Number: 6871QYH036D Description: PCB ASSEMBLY, DISPLAY YSUS ASSY 42V7 FOUND THESE ON THIS: http://cgi.ebay.com/LG-42-Plasma-TV-42PX3DCV-Parts-YSUS-ZSUS-CTRL_W0QQitemZ110086231102QQihZ001QQcategoryZ116199QQcmdZViewItem HOPE IT HELPS

Feb 26, 2007 | LG 50PX4DR 50 in. Plasma TV

Not finding what you are looking for?
LG 50PX4DR 50 in. Plasma TV Logo

Related Topics:

106 people viewed this question

Ask a Question

Usually answered in minutes!

Top LG Televison & Video Experts

Ekse

Level 3 Expert

13434 Answers

The Knight
The Knight

Level 3 Expert

76237 Answers

RONALD CARTER JR

Level 3 Expert

438 Answers

Are you a LG Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...