When i dial any number i am unable to hear the ougoing call tone and when a call comes in i am unableot hear the call. A symbol of lock comes when ever a call comes in
When answering a call, cannot hear person calling. This applies to incoming and outgoing calls. Everything else on phone is working.When answering a call, cannot hear person calling. This applies to incoming and outgoing calls. Everything else on phone is working.
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
You need to press the Phone or Speaker button or the soft key for Phone (see the LCD screen) after entering the phone number to dial the phone. Until you do, you can edit the phone number without actually making the call.
1) make sure is the phone is working good 2) there are tone dial 3) see the steps before o.k see ,if there are another phone having the same problem. The problem is service provider. 4) eliminate any background noise., mute the cordless handset before dialing. God bless you
If you are not getting a dial tone then something is holding the line off hook. Disconnect any other device you have on your lines and check to see if you get your dial tone back. If you still have no dial tone unplug each phone and check again. You may have to disconnect everything for a minute or two so the phone company will reset its equipment. Plug in your phones one at a time and check your dial tone every time you add something new.
If you add something and you loose your dial tone immediately you may have a crossed connection in the wall socket, any splitters or in the phone plug. Check to make sure all of the wires in those sockets are straight before you plug in your phone wire.
If you add your CC machine and everything is good but it fails after you run a transaction you will have to contact the supplier of your CC machine. It is not hanging up the line.
Dial Tone comes back even after I dial the phone! Question:
Why does my phone allow me to dial a number, hear the numbers being dialed and then go back to a dial tone? Help me I want to call out! Answer:
Sir the you are dialing on needs to have the other dial mode in operation. You have the ability to change dial mode on your phone. Instructions to change dial mode are usually at the beginning of the manual under install /set up the phone. If you are currently using pulse, please change the mode to tone. If using tone please change the mode to pulse. Doing this will allow you to call out. answer found on www.uniden.com
When answering a call, cannot hear person calling. This applies to incoming and outgoing calls. Everything else on phone is working.
×