Question about Husqvarna Garden

1 Answer

Husqvarna leaf blower, replace starter cord Model 132 HBV

Starter cord broke, how do we replace it.

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

    Governor:

    An expert whose answer got voted for 20 times.

  • Expert
  • 163 Answers

Remove the starter housing, usually only 3 or 4 bolts or screws. on the inside should be a large white or black wheel, hold the outer case with one hand and rotate the wheel counter-clockwise with the other as many times as can without force. on the inside of the wheel should be a small hole, rotate the wheel to line it up with rope guide hole on the outer case/housing. use a nail or small screwdriver to help hold in place. feed the start rope through the 2 holes and tie a knot at the end, single or double depending on the size of the hole. if the end of the rope is frayed, use lighter to melt and twist to a point to make it easier to handle. when reassembling you may need to jiggle the handle for realignment. it works on an inner spring coil tensioner system, so if the cable has no tension when rotated or doesn't recoil back, the starter assembly will need to be replaced.

Posted on Nov 30, 2008

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace a pull cord for pm 605 mcculloch chainsaw?


First remove the pull starter housing.
The next part is tricky. You'll have to release and unwind the spring that rewinds the pull starter cord. Remember how you do this because after replacing the cord, you'll have to rewind the cord and spring before inserting it back in the housing.
re-attach the pull cord housing to the chain saw.
Hope this helps.

Oct 19, 2014 | McCulloch Pro Mac 605 610 645 650 655...

1 Answer

How do i get recoil pulley out to replace starter cord on tb6040xp


can you just wind the spool a new rope , im not that familiar with this newer equipment however some thing only change a little.

Sep 20, 2014 | Garden

1 Answer

Pull cord broke of mower starter


Go buy part at Home Depot or wherever. Remove top cover. Remove pull cord housing. Install new pull cord housing. Replace cover.

Oct 09, 2011 | Ariens 21 In Classic Walk Behind Push Lawn...

1 Answer

Pull line broke.


Remove the starter housing from the engine, then unwind the rest of the cord from the reel. With both parts of the cord, measure the total length of cord plus some extra for knots. Take one of the remnants with you to a saw service shop for replacement cord purchase. You might even take the entire starter mechanism and have them rewind the cord for you if you don't feel comfortable about installing the new cord. When done, just reinstall the starter on the saw and attempt a start. Good luck!

May 17, 2010 | Garden

1 Answer

Cord broke for my leaf blower-how do I fix?


Remove the starter mechanism from the blower motor. Either purchase the same size cord from a saw service shop, or just have them fit a new cord to the starter if you don't feel comfortable about replacing the new cord. Good luck!

May 17, 2010 | Garden

1 Answer

Starter cord on Ryobi PLT3043A broke - is it simple to replace?


unless you are mechanically minded you can run into trouble it is best to get a quote from your local dealer

Jul 03, 2009 | Ryobi 15" Electric Factory Reconditioned...

1 Answer

Starter cord broke went to replace cord and spring came out. how do you rewind and reinstall spring and cord. have lots of tools


Best thing to do is replace the starter rope, if you don't, you're asking for trouble. Get the right length of rope, don't use a longer rope than recommended or you could wrap the spring too tight when you start the motor. I always replace the spring too. It's cheaper than trying to wind up the old one and get it back in. Good luck.

Jun 13, 2009 | Garden

Not finding what you are looking for?
Garden Logo

Related Topics:

2,731 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Garden Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

dannydoesita

Level 3 Expert

775 Answers

Wayne McNeil

Level 2 Expert

209 Answers

Are you a Husqvarna Garden Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...