Hotpoint bwd129 washer dryer won't dry my clothes.

Clothes not drying, but dryer runs & heats
1.defective operating thermostat---test thermostat, replace if defective
2.fan or it's pulley loose on shaft---tighten set screw
3.incorrect heat or timer settings---reset timer
4.clothes to wet when placed in dryer----wring out or extract water from clothes before placing in dryer
5.clogged lint screen or duct (little air motion)---clean out lint screen & duct

hi.you can try to change the heating element(even it is ok).good luck.

Hotpoint bwd 129 leaking from underneath This video will show you how to find that leak on any front loading washing machine
Please remember to subscribe to our YouTube channel for all appliance tutorials
a 4 THUMBS rating is appreciated for answering your FREE question.
And don't forget to like us on facebook

I have a similar Hotpoint model to this, that does something very similar now and again, usually when trying to set a delayed start.

The only way I have found to "fix" it is to turn the machine off for at least 5 minutes, and then try again.

Hope this helps.

The machine sounds faulty. You can bypass this by turning off the tap and respinning the clothes until the machine is fixed properly,

a washer dryer has a different approach to cleaning fluff. It has an internal flushing system.. only do routine check on pump filter.

Please provide more details about your appliance. What brand and the age.

hi steve.
this is all i could find.
see if this manual helps you out.this is a check list one.
http://laundry.manualsonline.com/manuals/mfg/hotpoint/bwd_129.html?p=17 .
or this link has more manuals.
hotpoint bwd129 manual Google Search

This is more a workaround than a solution. When you choose the washing programme (say "D") and push the on/off button, two lights will flash, the "door locked" and the "drying" one. Now turn the "drying programme" button until the "drying" light stops flashing (in my case, this is true when I set the drying programme to 40°C). Then start the washing mashine.

Seems like the function of the drying programme button has shifted against the settings written on the button...don't ask me why! Of course, no guarantee but works for me. Please let me know if it does for you.

Filter blocked, disconnect hose from under sink connection and drain into bucket. Hotpoint does not want you to change filter, contact Service Engineer.